Operation of models with cycle dial | ge.com |
i.mtStart
o
Off 0 | :_ Li_h_ W_s_q |
c_foL_bwgs,
Rinse Only
For rinsing partial loads that will be washed late_ Do not use detergent.
_ Make sure HEATEDDRYis not selected. | Slowly turn the Dial to RINSE ONLX |
Be sure the door is unlatched. | Latch the door to start the cycle. |
Plate Warmer or Drying
Forwarming clean dishes and serving plates.This cycle will take approximately 39 minutes.
*°'oHa ted r..........On) i
U lemed Dr u C'_I
| o | • |
|
|
StartOei_ | 1,; |
| % |
|
o! ID [ | \ | \ | /_ | Light,Cash |
Load clean dishware to be warmed. Select HEATEDDRY ON
Be sure the door is unlatched.
Hot Start or Hot Prestart Option
Preheatswash wateE
Selectthe HOTSTARTor HOTPRESTART
...........cyc e and any other option on the push
button pad,
_ Slowly turn the Dial to PLATEWARMERor
DRYING.
_ Latch the door to start the cycle.
Slowly turn the Dial to HOTSTARTor
..................HOT PRESTART.
atch the doorto start the cycle.
OI 0 | Light Wash |
s _rt_ei_ ,1,_- | ', |
_ii Be sure the door is unlatched.
Short Wash or Light Wash or Water Saver
For quickly washing loads of everyday disheswith light to medium soilsthat have not dried on.
L Be sure the door is unlatched. | _ Latch the door to start the cycle. |
Slowly turn the Dial to SHORTWASH, |
|
.................LIGHTWASH or WATERSAVER. |
|
Start Delay (on some models)
The STARTDELAYwill allow you to delay the start time of any cycle automatically up to 6 hours.
Be sure the door is unlatched. | _ Slowly turn the Dial to the desiredtime. |
| ...................The CYCLEON light will come on. |
Selectthe wash cycle and option you want. | Latch the door to start the cycle. |
Start (Models with a Dial)
Slowly turn the Dial to the STARTor ON position, or the selected cycle. Don'tturn it past the START, ON or cycle position; you could accidentally miss a prewash.
There is a time delay between
_;_Latch the door to begin the cycle.
