Window Installation Instructions
3REMOVE THE AIR CONDITIONER FROM THE CASE (CONT.)
ERemove and save the ground wire screw.
Ground 
wire 
Ground | FRONT |
screw |
FSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. Do not pull or lift on the styrofoam discharge area.
Do not pull or lift in this area— damage to the unit may result
FRONT
4INSTALL THE BOTTOM CASE SEAL
•Peel the backing from the bottom case seal and attach it along the bottom of the case in front of the bottom mounting rail.
Bottom mounting rail
Bottom case seal
5INSTALL THE TOP MOUNTING RAIL ONTO THE CASE
Attach the top mounting rail onto the top of the case with 3 Type B screws.
Press firmly to drive the screws into the gasket and through the top mounting rail.
Type B
screws
Top mounting rail
6INSTALL THE
SIDE ACCORDION PANELS
ASlide the left and right accordion panels into the top and bottom mounting rails.
BAttach the accordion panels to the case using 3 Type A screws on each side.
Top mounting rail
Accordion 
panel
Type A 
screws
BACK
Bottom mounting rail
9
