Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Instructions Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control to OFF and unplug your air conditioner before cleaning.

■GE does not support any servicing of the air conditioner. We strongly recommend that you do not attempt to service the air conditioner yourself.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips Installation

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified

service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Page 2
Image 2
GE AER05 installation instructions Safety Precautions
Page 1 Page 3

AER05 specifications

The GE AER05 is a state-of-the-art aircraft engine developed by General Electric Aviation, known for its innovative design and cutting-edge technology. This engine is primarily used in regional jets and some narrow-body aircraft, making it a key player in the aviation industry.

One of the main features of the AER05 is its fuel efficiency. The engine employs advanced materials and aerodynamic designs that minimize drag and enhance overall performance. This efficiency not only reduces operational costs for airlines but also contributes to lower emissions, aligning with global efforts to promote sustainability in aviation.

Another key characteristic of the GE AER05 is its lightweight construction. The engine utilizes composite materials, allowing it to achieve a significant reduction in weight without compromising on strength or durability. This lightweight design contributes to improved aircraft performance, enabling quicker ascents and greater payload capacity.

The AER05 also incorporates advanced noise reduction technologies. It features a unique fan design that helps to minimize noise during both takeoff and landing phases. This is increasingly important as airports around the world implement stricter noise regulations. The quieter operation enhances the passenger experience and reduces the environmental impact of air travel.

In terms of maintenance, the GE AER05 is designed with the operator in mind. Its modular architecture allows for easier access to components, streamlining maintenance procedures and reducing downtime. Airlines benefit from lower maintenance costs and enhanced reliability, which is crucial for keeping aircraft in the air and minimizing delays.

The engine is equipped with sophisticated digital controls and monitoring systems. These technologies enable real-time performance analysis, allowing for proactive maintenance and operational adjustments. The data gathered can also help airlines optimize their flight operations, leading to further improvements in efficiency and cost savings.

In summary, the GE AER05 is a prominent engine in modern aviation, characterized by its fuel efficiency, lightweight design, noise reduction capabilities, maintenance-friendly architecture, and advanced digital technology. Its innovative features ensure that it meets the demands of both airlines and passengers, making it a vital asset for the future of air travel. As the aviation industry continues to evolve, the AER05 stands at the forefront, embodying the technological advancements needed to create more sustainable and efficient air transportation solutions.
Top Page Image Contents