Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
12″ min.
(With accordion panels)
17″ min.
(Without accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.
Attach securely with nails or screws provided by the installer.
Wood
1/2″ higher |
|
than frame | Stool |
|
Storm window frame
3PREPARE THE AIR CONDITIONER
AInstall the top mounting rail with 2 Type A screws from the outside of the case.
Top mounting rail
Bottom mounting rail
BSlide the left and right accordion panels into the top and bottom mounting rails.
CAttach the accordion panels to the case using 2 Type A screws on each side.
Top mounting rail
Accordion panel
Type A screws
BACK
Bottom mounting rail
8