![Save This Manual](/images/new-backgrounds/89686/896863x1.webp)
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the end of this manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Important Safety
Instructions
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
| DANGER indicates a | |
Danger | ||
hazardous situation | ||
| which, if not |
avoided, will result in death or serious injury.
WARNING WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
| CAUTION, used with | |
Caution | ||
the safety alert | ||
| symbol, indicates a |
hazardous situation which, if not avoided, could result in minor or moderate injury.
| NOTICE is used to | |
Notice | ||
address practices | ||
| not related to | |
personal injury. | ||
| CAUTION, without | |
Caution | ||
the safety alert |
symbol, is used to
address practices not related to personal injury.
READ AND UNDERSTAND ALL
INSTRUCTIONS
When using this product, safety precautions should always be followed including the following:
General Safety
1.Do not use this product for other than its intended use. Inspect before use. Do not use if parts are loose or damaged.
2.Maintain labels and nameplates on the product. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.This product is not a toy. Keep it out of reach of children when children are not being closely supervised.
4.Make sure to install this product on a clean, dry, flat, level surface capable of supporting the weight of the product and its contents.
5.Wear
impact goggles and
6.Do not exceed the total weight capacity of (400 pounds). Also, make sure the weight is distributed evenly on each Bench. Be aware of dynamic loading. Dropping or bouncing on bench may briefly create excess load causing product failure.
SKU 97736 | For technical questions, please call | Page 2 |