Installation Instructions

3REMOVE THE AIR CONDITIONER FROM THE CASE

ARemove the 2 shipping screws from the back of the case.

BRemove the 2 screws on each side of the case. Keep these for later use.

Shipping screws

CSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.

4PREPARE THE WINDOW AND THE CASE

ACut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.

4PREPARE THE WINDOW AND THE CASE (CONT.)

BCarefully insert the plastic frame guides into the bottom of the case on each side.

Bottom of case

Frame guide

CRemove the backing from the top mounting rail seal strip and attach it to the bottom of the top mounting rail.

DInstall the top mounting rail with 3 type A screws on the inside of the case. Insert the frames for the accordion panels into the top mounting rail and the frame guides. Attach the accordion panels to the side of the case using 4 type A screws on each side.

Top mounting rail

Frame guides

10

Page 10
Image 10
GE AGE07 installation instructions Remove the AIR Conditioner from the Case, Prepare the Window and the Case