HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
manual before it is used.
installed and grounded as described in this
■ Use this appliance only for its intended purpose as described in this Owner’s Manual.

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

SAFETY PRECAUTIONS

When using this dehumidifier, always follow basic safety precautions, including the following:

■ Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage

■ This dehumidifier must be properlyalong its length or at either the plug or connector end.

■ Never operate this dehumidifier in an area

■ Turn the humidity control to OFF and

unplug your dehumidifier before making

that is likely to accumulate standing water. If

any repairs or cleaning.

this condition develops, for your safety

NOTE: We strongly recommend that any

disconnect the power supply before

stepping into the water.

servicing be performed by a qualified

■ Never unplug your dehumidifier by pulling

individual.

 

on the power cord. Always grip plug firmly

■ For your safety, do not store or use

and pull straight out from the receptacle.

combustible materials, gasoline or other

 

flammable vapors or liquids in the vicinity

 

of this or any other appliance.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The dehumidifier should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

3

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips

Customer Service

Page 2 Page 4
Page 3
Image 3
GE AHG50, AHG25, AHG40 owner manual Safety Precautions
Page 2 Page 4

AHG25, AHG40, AHG50 specifications

The GE AHG50 is a cutting-edge gas turbine generator that has been making waves in the energy sector due to its advanced design and efficiency. This turbine is part of the Advanced Gas Path (AGP) technology family, which has been specifically engineered to optimize performance and increase operational flexibility. With a focus on reliability and sustainability, the GE AHG50 stands out for its enhanced efficiency and lower emissions, making it an attractive option for various applications, including power generation and industrial processes.

One of the main features of the GE AHG50 is its modular design, which allows for easier maintenance and quicker upgrades. The turbine is equipped with the latest materials and cooling technologies, enabling it to operate at higher temperatures without sacrificing durability. This capability translates into improved efficiency, as it allows the turbine to extract more energy from the fuel being burned.

In terms of characteristics, the GE AHG50 boasts a power output of approximately 50 megawatts, making it suitable for both distributed energy systems and larger utility-scale projects. The turbine's high efficiency rating not only reduces fuel consumption but also translates into lower operational costs for users. Moreover, the AHG50 can easily integrate with various renewable energy sources, such as solar and wind, to create hybrid systems that enhance overall grid stability and reliability.

The turbine also features advanced digital controls, leveraging GE’s expertise in analytics and software technologies to optimize performance and predictive maintenance. This digital capability is essential for monitoring the turbine's health, allowing operators to identify potential issues before they lead to costly downtime.

With its robust design and advanced technologies, the GE AHG50 is primed to meet the demands of a rapidly evolving energy landscape. It provides a reliable, efficient, and environmentally friendly solution for energy generation, making it an ideal choice for power plants aiming to enhance productivity while adhering to stricter emissions regulations.

Overall, the GE AHG50 gas turbine generator represents a significant advancement in turbine technology, combining efficiency, flexibility, and sustainability into a single package. With its impressive features and state-of-the-art engineering, it is well-positioned to play a vital role in the future of power generation.
Top Page Image Contents