GE AHM24 About the controls on the air conditioner, Controls, Remote Control, Power Pad, Display

About the controls on the air conditioner

Features and appearance will vary.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

NOTE: The display always shows the room temperature except when setting the Set temperature or the Delay timer.

°F/°C

Hr

Unit power on/off

Mode select

Fan speed

Delay 1–24hr

Fan	High	On	Temp / Delay
Only			Temperature
Cool	Med	Off
			set/Delay
Saver	Low			Temp / Delay
			Timer Increase
Energy
Auto			and Decrease

Air Conditioner Controls Remote Control

Controls

Power Pad

Turns air conditioner on and off. When turned on, the display will show the room temperature.

Display

Shows the room temperature or time remaining on the Delay timer. Shows the Set temperature while setting the temperature in Cool or Energy Saver modes. The Set light will turn on while setting.

Temp and Delay Increase ▲ /Decrease ▼

Pads

Use to set temperature or delay time. Temperature can be set in Cool, Energy Saving and Auto mode.

Mode Pad

Use to set the air conditioner to Fan Only, Cool, Energy Saver or Auto mode.

Fan Speed Pads

Use to set the fan speed to Low, Med, or High on the unit.

Delay Pad

'HOD\21³When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode and fan settings.

'HOD\2))³When the air conditioner is on, it can be set to automatically turn off in 1 to

24hours.

How to set:

Press the Delay 1–24hrpad on the unit or the remote control. Each touch of the Increase ▲ / Decrease▼ pads on the unit or the Increase +/ Decrease – pads on the remote control will set the timer in 1-hour intervals.

To review the remaining time on the Delay 1–24hrtimer, press the Delay 1–24hrpad on the unit or the remote control. Use the Increase ▲ / Decrease ▼ pads on the unit or the Increase +

/Decrease – pads on the remote control to set a new time if desired.

To cancel the timer, press the Delay 1–24hr pad until the light on the Delay 1–24hr pad goes off.

4