Usingthe dehumidifier.
Always make sure the water bucket is locked into place on the dehumidifier.
Removing Collected Water
There are 3 ways to remove collected water'.
[] Use the bucket. _q_en the bucket is remoxed,
the unit will shut off. Erupt)and replace the bucket.
[] Use a hose. Water can be automatically emptied into a floor drain by attaching a
water hose (not included) to the bucket hose nozzle. Using a (lcill, make a hole at the end of the nozzle located on the lower lett side ot the bucket. Attach a water hose to the bucket nozzle. Fasten bv hand only.
Drill hole: | Attach hose: |
Nozzle
Hose NN_
Installing the Water Bucket
IJfl the bucket and hook the slots on each side onto the posts on the back of the dehumidifie_; The bucket should lock securely in place.
[] Use a floor drain. The unit can also be placed oxer a floor drain. Using a ddll, make a hole at the end of the nozzle located on the lower
left side of the bucket.
Drill
NOTE.Thenozzlecannot"be fixed after puncture. Use an ordinary garden hose cap (notincluded) to reclose if necessan/
NOTE:Avoid using mechanicaltools to tighten the water hoseto the bucket nozzle.Thismay damagethe threads on the nozzle.
Make sure the bucket is locked securely in place by pressing down on the ul)per back edge of the
bucket. It will be firefly seated when properly installed.
_\ Post
Water Level
The dehumidifier will mrn off automatically when the bucket is flfll, or when the bucket is removed or not replaced in the proper position.
The bucket must be replaced in the proper position for
the dehumidifier to work. The light will be on and the dehumidifier will not run if the bucket is not in the
proper position.
