AJCS12DCC

GE® ENERGY STAR® 230/208 Volt Built-In Room Air Conditioner

Wall Case Dimensions and Installation Information (in inches)

Installation Information: A finished opening of 26-1/8" x 15-3/4" clear of intrusions is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.

Note: Units should be caulked on all four sides of case to the building exterior to assure building integrity.

Two Wall Cases for Tenant Option Installation

When the air conditioner is offered as a tenant option, these wall cases provide protection against outside elements.

RAB47 – includes wall case, exterior grille and steel closure panels.

Make frame if desired or caulk between case and siding

26-1/815-3/4

Lintel

 

OUTSIDE

16-7/8

 

Caulking

 

Drip Rail

 

Plaster Line

Trim Molding (if desired)

INSIDE

RAB48 – includes wall case, exterior grille, steel closure panel and two layers of insulation.

Standard Wall Case RAB46

Solid-sided wall case fabricated of galvanized steel with baked enamel finish. Welded areas are coated with a sealing compound to help resist rust and corrosion. Polymer gasket surrounds opening to assure tight weather seal. Aluminum grille (RAG13) is included. Panels on interior and between case and grille provide weather protection prior to installation of chassis. Provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Frame Construction

Flexible Mounting Position

 

Lintel

 

15-3/4

 

26-1/8

 

Fill open cells with mortar

Brick Block and Brick or insulation

Frame Construction

 

Total volume and shelf

Listed by

 

area are calculated by

 

Underwriters

 

the Association of Home

 

Laboratories

 

Appliance Manufacturers’

 

 

R

standards.

 

Specification Created 1/07

390124

Page 1 Page 3
Page 2
Image 2
GE AJCS12DCC Frame Construction Flexible Mounting Position, Brick Block and Brick or insulation Frame Construction, Inside
Page 1 Page 3

AJCS12DCC specifications

The GE AJCS12DCC is a standout model in the lineup of air conditioning units, designed to deliver efficient and reliable cooling performance in residential settings. This air conditioning system stands out with its combination of advanced features, cutting-edge technologies, and user-friendly characteristics.

One of the most notable features of the GE AJCS12DCC is its energy efficiency. Designed with modern environmental considerations in mind, this unit boasts a high Seasonal Energy Efficiency Ratio (SEER) rating. This means it consumes less electricity while providing superior cooling power, ultimately leading to lower energy bills and a reduced carbon footprint. The incorporation of eco-friendly refrigerants further enhances its appeal among users who prioritize sustainability.

In terms of technologies, the GE AJCS12DCC utilizes advanced inverter technology, which allows the compressor to operate at variable speeds. This feature means that rather than cycling on and off, the unit can adjust its cooling output based on the ambient temperature. This results in not only improved energy efficiency but also a more consistent and comfortable indoor climate.

Another significant characteristic of the AJCS12DCC is its user-friendly interface, which includes a remote control for easy adjustments. The unit is also equipped with a programmable thermostat, allowing users to set specific cooling schedules according to their daily routines. This flexibility further enhances its energy-saving capabilities, as it can be programmed to reduce cooling output when not in use.

The GE AJCS12DCC is also designed for quiet operation, making it an excellent choice for bedrooms and living areas. Its sound-dampening technology minimizes noise levels, ensuring that users can enjoy a peaceful environment even during peak operation.

Furthermore, the unit includes robust filtration systems that help improve indoor air quality by capturing dust, allergens, and other particulates, making it a great option for families and individuals sensitive to air quality.

In summary, the GE AJCS12DCC exemplifies modern air conditioning technology with its energy-efficient performance, inverter technology, user-friendly controls, quiet operation, and air quality enhancements. It is a comprehensive solution for those seeking comfort and efficiency in their cooling systems.
Top Page Image Contents