ge.com

Fan Switch

To reach the fan switch(es) remove the front grille.

Safety Instructions

On Heat/Cool and Heat Pump models, the fan switch levers are located in holes accessed through the control box. The top switch is for COOL settings and the bottom switch is for HEAT settings.

Use a small screwdriver to change the setting. The unit is shipped from the factory set in the CONT setting for COOL and in the CYCLE setting for HEAT.

or

(Depending on model)

Operating

Cool only models have a rocker switch on the front of the control box.

When set at CYCLE (down) the fan cycles on and off when cooling. When set at CONT (continuous, up) the fan runs all the time, providing a more balanced temperature. The unit is shipped in the CONT setting.

Instructions Care and

Temperature Limiting

Limiting the maximum and minimum settings prevents users from turning the control to the extreme heat or cool positions.

The normal range of the temp control is approximately 60°F to 85°F. The control range may be narrowed by the use of the temperature limiting screws located behind the control panel.

Limits

Limits

heat

cool

temp

temp

Cleaning Installation

Each position equals approximately 3°F.

Vent Control

The vent control is located behind the front grille on the right side of the air discharge area. When set at CLOSE, only the air inside the room will be circulated and conditioned. When set at OPEN, some inside air is exhausted outside.

To open or close the vent:

1.Remove the front grille.

2.Remove the vent card screw.

3.Remove vent card, turn it over and replace it by locating rear hole in card over locating pin inside air discharge and reattaching screw at front.

The unit leaves the factory set at the CLOSE position.

Locating hole

Locating hole

Screw hole

Screw hole

OPEN position

CLOSE position

(Mesh end toward back)

(Mesh end toward front)

Instructions Troubleshooting Tips

Air Direction

Horizontal louvers

Remove the front

 

on the front grille

grille to adjust the

 

let you control the

vertical louvers

 

air direction up

side-to-side to

 

and down.

direct the air left

 

 

or right.

9

 

 

Consumer Support

Page 9
Image 9
GE AJHS10DCC Temperature Limiting, Cleaning Installation, To reach the fan switches remove the front grille

AJHS10DCC specifications

The GE AJHS10DCC is a cutting-edge window air conditioning unit designed to provide efficient cooling solutions for residential spaces. With a compact design and a range of features, it is well-suited for both small and medium-sized rooms, ensuring comfort during the hot summer months.

One of the standout features of the GE AJHS10DCC is its cooling capacity. With a powerful 10,000 BTU rating, this unit can effectively cool spaces up to approximately 450 square feet, making it ideal for living rooms, bedrooms, or even office spaces. Additionally, the unit operates quietly, allowing users to enjoy a comfortable environment without disruptive noise levels.

The GE AJHS10DCC also incorporates a user-friendly digital thermostat with a remote control, providing convenience and flexibility. Users can easily adjust settings from a distance, which is particularly useful when relaxing on the couch or in bed. The programmable timer feature further enhances user experience, enabling the air conditioner to turn on or off at pre-set times, helping to save energy and reduce utility bills.

Energy efficiency is another key characteristic of the GE AJHS10DCC. It is ENERGY STAR certified, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only contributes to lower electricity bills but also aligns with eco-friendly practices, making it a responsible choice for consumers concerned about their environmental impact.

The unit features multiple cooling and fan speeds, along with an energy-saver mode. This allows users to customize their cooling experience based on personal preferences or room conditions. Additionally, the adjustable air vents enable better airflow distribution, ensuring that every corner of the room gets adequate cooling.

Installation of the GE AJHS10DCC is straightforward, thanks to the included mounting accessories. It's designed to fit most standard window sizes, and its lightweight construction makes it easy to handle. Moreover, the unit comes equipped with a washable filter, promoting cleaner indoor air quality by capturing dust and allergens, which can be easily maintained for optimal performance.

Overall, the GE AJHS10DCC combines powerful cooling capabilities with energy efficiency and user-friendly features, making it a top choice for anyone looking to enhance their indoor comfort during the warmer months.