GE ASP14, ASV18, ASW24 Installation Instructions, Support, Storm Window Requirements, Safety

Read completely, then follow step-by-step.

Safety

1	Window Requirements
	■These instructions are for a standard double-
	hung window. You will need to modify them for

other types of windows.

■The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions at right.

■All supporting parts must be secured to firm wood, masonry or metal.

■The electrical outlet must be within reach of the power cord.

173⁄8″ min.

30″ to 41″

(With accordion panels)

26″ min.

(Without accordion panels)

Instructions Operating Instructions

2	Storm Window Requirements
	A storm window frame will not allow the air
	conditioner to tilt towards the outside and will keep
	it from draining properly. To adjust for this, attach
	a piece of wood to the stool.
					Wood
		1/2″ higher
		than frame
				Stool
			Storm window
			frame

WOOD PIECES—

WIDTH: 2″

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.

Attach securely with nails or screws provided by the installer.

Installation Instructions

Remove the Front Grille, if attached

3	A	Remove shipping tape if present. On models
		with a slide out air filter, remove it (see the Care

and Cleaning section) and the screw behind it (if present) that holds the grille in place.

B

A

C

Pull the bottom grille corners out to release the lower tabs on each side.

NOTE: Do not pull the bottom edge toward you more than 3 ″ or you may damage the tabs of the grille.

Lift the grille up and off the top tabs.

Troubleshooting Tips Consumer

A	On models with a raise up
	inlet grille, lift it (see the
	Care and Cleaning section)
	and remove the screw
	behind it (if present) that
	holds the grille in place.

11

Support