GE AVM18 Window Installation Instructions, CustomerService, Attach the Filler Panels to the Case

Window Installation Instructions

Remove the Air Conditioner from the Case

3	A	Remove the air filter. Lift the top of the filter
		and gently pull it up.

C

Remove one screw from each side of the case. Keep these ground/anti-theft screws so they may be replaced at the end of the installation.

Case

BRemove the 2 screws and lift off the front grille.

Keep these screws to re-attach the grille later.

D

Remove	Air conditioner
screw

Slide the air conditioner out of the case by grasping the rear of the evaporator cover and pulling forward while bracing the case.

Remove screws

NOTE: The air conditioner is very heavy. It may require two or more people to remove it from the case.

TroubleshootingTips Installation Instructions OperatingInstructions SafetyInstructions

CustomerService

Attach the Filler Panels to the Case

4	Attach filler panels to the existing holes in the case
	using eight #8 x 3/8″ long hex head screws.	Filler panel

Top bar

Bottom bar

10