5
Install the Case in the Window
AOpen the window and mark the centerline on the stool.
Mark centerline
C
D
Close the window until it touches behind the top retainer bar.
Secure the case through the case track into the window stool on each side, using two 1″ screws.
Safety Instructions Operating
BCarefully place the case in the window and align the center of the bottom tie bar with the centerline on the window stool. Do not release your grip on the case until the window is in its final position.
Top retainer bar
Bottom tie bar
Secure to stool
Instructions Installation
6
Assemble and Attach the Sill and Support Brackets
Instructions
ALoosely attach the sill brackets to the support brackets with 5/8″ long carriage bolts and nuts.
Support bracket
Carriage bolt
Nut
Sill bracket
BFind the track hole that aligns with the sill bracket on the outer edge of the window sill. Using the 5/8″ long machine screws and nuts attach the support brackets to the case track hole on each side.
CAttach both sill brackets to the window sill using a 1″ long screw on each side.
DTighten the bolts and nuts on both sides.
Level
NOTE: When finished, use a level to make sure the case tilts to the outside 1/4″ minimum. This prevents water from entering the room.
Troubleshooting Tips
Track hole
Sill
11
Customer Service
