GE Appliances
AZ58H09E – GE Zoneline® Premium Series Heat Pump Unit
Wall Case Dimensions | Maximum Cord Extension (in inches) |
Electrical Wiring
All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
A
C
B
RAB71 Wall Sleeve
RAB77 Wall Sleeve
Molded SMC
265 Volt
21 | 58 |
Wall Opening Di m ensions
Add 1/4" to A and C dimensions for all
RAB71 available in 16 24 28 and 31 depths RAB77
Note: Aluminum wiring may pose special problems – consult a qualified electrician.
Grille Options
Stamped Aluminum Grille – RAG60
Exterior Architectural Louvers Durable Polycarbonate:
RAG61 or RAG64 (Beige) | RAG63 or RAG66 | (Bittersweet) |
RAG62 or RAG65 (Maple) | RAG67 (Extruded | Aluminum) |
Retrofit Kits:
RAK901L – Wall Case Insulation for use with heat pumps. RAK40 – Deflector Kit to adapt chassis for use with existing exterior architectural louvered grilles.
Electrical Connection
230/208 volt units may be plugged into a receptacle. 265 volt units are provided with a junction box and require direct connection. (NEC Requires 265V Direct Connection) See Architects and Engineers Design Data Manual for electrical connection information including use of
|
|
|
| Min. Circuit |
| Power | Electric | Electric | Protection |
Connection Kit | Heater Watts | Heat Amps | (Amps) | |
RAK204E15 | RAK5172 | 2,550 | 10.3 | 15 |
RAK204E20 | RAK5202 | 3,450 | 13.7 | 20 |
RAK204E30 | RAK5302 | 5,000 | 19.6 | 30 |
Power Connection kits required on all Zoneline chassis.
For answers to your Monogram ® GE Profile™ or GE® appliance questions, visit our website at ge .com or call GE Answer Center® service, 800.626.2000.
Specification Created 9/04
390569