Use an Adapter/Charger or Battery to Supply Power

Attaching the Adapter/Charger

1.Slide the OPEN-BATTbutton to open the battery compartment. Carefully open the compartment fully.

2.Insert the DC connecting cord from the DC output terminal on the AC adapter/charger to the DC input terminal on the camcorder.

3.Close the battery compartment.

4.Plug the AC adapter/charger power cord into an AC operating outlet. The adapter/charger’s POWER indicator lights.

1

4

2

Installing the Battery

The battery pack is not charged and must be charged before it can be used the first time. Details are on page 14.

1.Slide the OPEN-BATTbutton to open the battery compartment.

2.Insert the battery sideways as shown and snap into place.

To remove the battery, slide it toward the back of the camcorder and lift out.

3.Close the battery compartment.

2

1

2

Attach Lens Cap Cord and Adjust Handstrap

1.Remove lens cap and attach the cord to the lens cap.

2.Pull up the flap, run the cord through the A/V terminal cover,and attach to the handstrap.

3.Adjust the strap for comfort, attach the lens cap cord, and then close the flap.

Tips: Make sure the end of the strap is positioned securely before closing the flap.

The lens cap can be clipped onto the handstrap.

1

3

2

9

Page 13
Image 13
GE CG400 manual Use an Adapter/Charger or Battery to Supply Power, Attach Lens Cap Cord and Adjust Handstrap