Defrosting instructions.

ge.com

In most climates, defrosting will be

To remove frost, scrape with a plastic or

necessary only about twice a year.

wood spatula or scraper.

To have your freezer operate most efficiently,

Do not use an ice pick or sharp-edged

do not permit more than 1/2 (13 mm) of

instrument as it may damage or scratch the freezer.

frost to accumulate on the shelves.

Do not use any electrical device in defrosting

 

 

your freezer.

Safety Instructions

For Complete Defrosting

1 Turn the temperature control to the OFF position and unplug the freezer.

2 Remove all food and place it in corrugated boxes, insulated bags, picnic coolers, etc. Use towels and newspapers for insulation as needed.

3 With the door/lid open, use pans of hot water to speed loosening of frost. Remove large pieces before they melt.

Chest models have a defrost water drain at the front.

NOTE: Water may drip from the back flange of the lid cover during defrosting. This is normal. Ice builds up in the lid insulation when the lid is open for adding or removing food, and melts during the defrosting operation.

4

5

6

7

Sponge excess water from the bottom of the freezer as it collects to prevent overflowing.

After defrosting, clean the inside of the freezer (see Care and Cleaning).

Replace the drain plug inside the cabinet and the cap on the defrost drain. Fold over and dry the gasket on the hinge side of the lid.

Plug in the freezer. Return the temperature control to its previous position and return food to the freezer.

Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support

7

Page 7
Image 7
GE FCM5, FCM9, FCM7 owner manual Defrosting instructions, For Complete Defrosting

FCM7, FCM5, FCM9 specifications

General Electric's FCM series, specifically the FCM9, FCM5, and FCM7 models, represent a significant advancement in the realm of industrial motors and generators. These models have been engineered for high performance, reliability, and efficiency, making them suitable for a variety of applications in sectors ranging from manufacturing to energy generation.

The FCM9 model stands out due to its robust design and superior efficiency. This motor is primarily utilized in high-demand environments where continuous operation is crucial. One of the hallmark features of the FCM9 is its ability to operate at extended temperature ranges, which enhances its adaptability to harsh conditions. Additionally, GE has incorporated advanced cooling technologies in the FCM9, allowing it to maintain optimal performance even under heavy loads.

Similarly, the FCM5 model is designed to meet the needs of mid-range applications. It embodies a unique blend of performance, size, and cost-effectiveness. The FCM5's innovative design includes a lightweight construction and compact form factor, making it an ideal choice for installations where space is limited. It comes equipped with advanced electronic controls that allow for real-time monitoring and diagnostics, contributing to improved operational efficiency and reduced downtime.

The FCM7 model is tailored for applications that demand high torque and varied speed capabilities. It features a modular design, offering flexibility in configuration and customization to meet specific operational requirements. One of its standout technologies is the implementation of variable frequency drives (VFD), which enhance energy efficiency by allowing users to modulate power consumption based on demand. The FCM7 is also built with durable materials that withstand wear and tear, ensuring longevity and decreased maintenance costs.

Each of these models shares common characteristics that define the FCM series, including low noise emissions, high starting torque, and excellent overload capabilities. In addition, GE has integrated advanced diagnostic tools within these motors, making it easier for operators to identify issues before they escalate.

In conclusion, GE's FCM9, FCM5, and FCM7 models are exceptional choices for industries seeking reliable and efficient power solutions. With their robust features and cutting-edge technologies, these motors exemplify GE's commitment to innovation and excellence in industrial application.