Millenium™ RO System by GE Osmonics

1.12Electromagnetic Interference

This equipment can generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving device

•Increase the separation between the equipment

•Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected

•Consult the field service technician or manufacturer for help.

1.13Service Assistance

If service assistance is required, please take the following steps:

Consult the “Troubleshooting” section of this manual (Chapter Five). If the problem cannot be identified and corrected by any of the procedures found in that section, then...

Contact your Facility Equipment Technician. If the technician is unable to help then…

Call GE Osmonics Technical Service Department at (800) 633-3080 or (206) 395-2200. Technicians are available for all calls between 7:00 a.m. and 4:30 p.m. PST, Monday through Friday. Technicians are also available at other times for emergency calls only. Product consultants will be on hand to discuss the problem with you and endeavor to rectify it over the phone. If the problem appears to be of a more serious nature, you will be given instructions regarding the action to be taken. Prior to making the phone call, you must be prepared to answer two questions:

1.What RO do you have, i.e. Millenium™

2.What is the serial number of your RO? (Label, found on back of RO.)

RO SERIAL NUMBER: ______________________

14693e – 31 Mar 03

1 - 14

General Information