GE GFWS3505 Operating, Instructions, Tips, Extra Rinse, 10Delay Start, Lock, Consumer Support

About the washer features.

NOTE: Features may not be available on all washer models.GEAppliances.com

9	Extra Rinse
	Use an extra rinse when additional rinsing
	is desired to remove excess dirt and
	detergent from soiled loads.

Safety Instructions

10Delay Start

You can delay the start of a wash cycle for 10–18 hours, depending on the model. Press the DELAY START button to choose the number of hours you want to delay the start of the cycle, then press the START button. The machine will count down and start automatically at the correct time.

NOTE: If you forget to fully close the door, a reminder signal will beep reminding you to do so.

NOTE: If you open the door when the delay is counting down, the machine will enter the pause state. You must close the door and press START again in order to restart the countdown.

Operating

11

Lock

You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle.

Children cannot accidentally start the washer by touching pads with this option selected.

To lock the washer, press and hold the LOCK button for 3 seconds.

To unlock the washer controls, press and hold the LOCK button for

3 seconds.

The control lock icon on the display will light up when it is on.

NOTE: The POWER button can still be used when the machine is locked.

Instructions

12

MY CYCLE (on some models)

To save a favorite cycle, set the desired settings for wash cycle, soil level, spin speed and wash temp settings and hold down the MY CYCLE button for 3 seconds. A beep will sound to indicate the cycle has been saved.

To use your custom cycle, press the

MY CYCLE button before washing a load.

To change the saved cycle, set the desired settings and hold down the MY CYCLE button for 3 seconds.

NOTE: When using MY CYCLE, wash options cannot be modified after the cycle has been started.

NOTE: If you change wash options with MY CYCLE before starting the cycle, the MY CYCLE light will turn off and you will be returned to the base cycle.

Installation Instructions

Troubleshooting

13	ENERGY SAVINGS WASH (on some
	models)

Use "e" WASH to save energy on

specified wash cycles. "e" WASH cannot be used with STEAM REFRESH, STAIN WASH and BASKET WASH.

Tips

14 STEAM ASSIST (on some models)

STEAM ASSIST adds steam into the washer during WHITES/HEAVY DUTY, COLORS/NORMAL, STAIN WASH or ACTIVE WEAR cycles.

To use:

1. Turn power ON and select a wash cycle.

The STEAM ASSIST option is only available on WHITES/HEAVY DUTY,

COLORS/NORMAL, STAIN WASH, ACTIVE WEAR or EASY CARE cycles.

2.Select the STEAM ASSIST button to activate Steam.

3.Press the START/PAUSE button.

Consumer Support

7