ge.com

_l Options

 

The light above the selected pad will be ON to indicate which OPTION has been selected.

HOT START

For use with heavily soiled and/or dried-on, baked-on soils. This option MUST be

(on some

selected PRIORto starting the cycle. This option will improve both wash and dry

models)

performance. This option adds 20 minutes to the cycle time.

 

NOTE:Cannot be selected with RINSEONLY cycle.

HEATEDDRY

Shuts off the drying heat option. Dishes air dry naturally and energy is saved.

Light OFF

For faster air dry you can prop the door open after the CLEAN light illuminates.

HEATEDDRY

Turns the heater on for fast drying. This will extend the total run time by B8 minutes.

Light ON

NOTE: Cannot be selected with RINSE ONLY cycle.

LOCK

You can lock the controls to prevent any selections from being mode. Or you con lock

 

the controls after you have started a cycle.

(on some

models)

Children cannot occidentally start dishwasher by touching pads with this option selected.

ToLOCKthe dishwashercontrol, touchandholdthe HEATEDDRYpadfor 3 secondsThelightbelow. the HEATEDDRYpadwillturn on.ToUNLOCKthe dishwashercontrol,touchand holdthe HEATED DRYpadfor 3secondsThe.LOCKlightwill turn off.

HOT WASH

When selected, the cycle will run longer with the heating

element on to improve both

 

wash and dry performance. NOTE: Cannot be selected with RINSE ONLY cycle.

DELAY HOURS

You can delay the start of a wash cycle for 2, 4 or 8 hours

{delay time options may

 

vary by model). Touch the DELAY HOURS pad to choose the number of hours you want

 

to delay the start of the cycle; then touch START/RESET one time. The dishwasher will

 

count down and start automatically at the correct time. Touching START/RESETa

 

second time will cancel the DELAY START selection.

 

RESET

To change a cycle offer washing starts, touch the START/RESETpod to cancel the

 

cycle. The START/RESETlight will flash while the water is pumped out if needed. This

 

tokes approximately 90 seconds. When the light stops flashing, the dishwasher can be

 

reprogrammed and restarted.

 

Start

Close and latch the dishwasher door and select the cycle and desired enhancements. Touch the START/RESETpad once to begin the cycle. Water begins to fill the dishwasher, and approximately 60 seconds later the wash action begins. Touching the START/RESETpad a second time will cancel the cycle and cause the water to drain out. This will take approximately 2 minutes.

NOTE:The dishwasher remembers your last cycle so you don'thave to reprogram each time. When the dishwasher door is fully closed, the control panel lights will display the last settings you selected.

If you don'twant to change any of the settings, simply touch the START/RESETpad once to begin the cycle.

If the door is closed, the indicator lights will turn off if the START/RESETpad is not pressed within two minutes. To activate the display, open and close the door or touch any pad.

Also, if a power failure occurs, NORMAL and HEATEDDRY will automatically be programmed.

Page 6 Page 8
Page 7
Image 7
GE GLDSO00, GHDA400 Light on, Controls after you have started a cycle, Models, Reprogrammed and restarted
Page 6 Page 8

GLDSO00, GHDA400 specifications

The GE GHDA400 and GLDSO00 are prominent models in GE's lineup, renowned for their advanced features and technologies that cater to diverse industrial applications.

One of the key attributes of the GE GHDA400 is its impressive power handling capabilities. With a design built to efficiently manage high voltage and current, it is ideal for environments that require robust electrical performance. This model incorporates a state-of-the-art thermal management system to ensure optimal operation even under challenging conditions, thereby reducing the risk of overheating and prolonging the device's lifespan.

Additionally, the GHDA400 is equipped with advanced monitoring capabilities. It features integrated sensors that provide real-time data on operational parameters, allowing for informed decision-making and timely maintenance. This predictive maintenance functionality is crucial for minimizing downtime and enhancing productivity in industrial settings.

The GE GLDSO00, on the other hand, focuses on versatility and adaptability. It supports a broad range of input and output specifications, making it suitable for various applications in sectors such as manufacturing, energy, and transportation. The GLDSO00 is designed with modular components, allowing users to configure the system according to specific needs, thus enhancing its usability and effectiveness.

Another significant characteristic of both models is their compliance with the latest industry standards. They meet stringent safety and environmental regulations, ensuring that they operate not only efficiently but also responsibly. This commitment to sustainability is evident in the energy-efficient technologies employed in both devices, which help reduce overall energy consumption.

Furthermore, user-friendly interfaces are a hallmark of these models. They come with intuitive control systems that enable operators to access and manage settings with ease. This simplifies the transition for users, ensuring a smooth implementation process and reducing the learning curve associated with new technologies.

In conclusion, the GE GHDA400 and GLDSO00 stand out in their respective categories due to their robust designs, advanced monitoring and management features, versatility, compliance with industry standards, and user-friendly interfaces. As industries continue to evolve, these models are well-positioned to meet the growing demands for high-performance, reliable solutions.
Top Page Image Contents