Installation | Preparation | Installation | Instructions |
PREPARE ELECTRICAL WIRING
FORPERSONALSAFETY:Do not use an extension cord or adaptor plug with this appliance.
Electrical Requirements
oThis appliance must be supplied with 120V, 60 Hz, and connected to an individual properlg grounded branch circuit, protected bg a 15 or 20 ampere circuit breaker or time delag fuse.
, If the electrical supplg does not meet the above requirements, call a licensed electrician before proceeding.
[] Your dishwasher circuit should not be used for ang other appliance while the dishwasher is in operation as the dishwasher requires a full capacitg of the circuit.
STEP 1 REMOVE WOOD BASE
IMPORTANT- Do not kick off wood base! Damage will occur.
,Move the dishwasher close to the installation locution and lag it on its back.
Remove the four skid bolts on the underside of the wood base with 3/8" nut driver
Discard base and bolts. Upright the dishwasher
STEP 2 INSTALL FAUCET ADAPTER
[] If the wall receptacle gou plug the dishwasher'spower cord into is
controlled bg a switch, turn on the
Insure proper ground
The special faucet adapter supplied with gour dishwasher must be attached to the sink faucet before gou can use gour
exists before use
switch.
Do not, under ang circumstances, cut or remove the third grounding prong from the power cord.
Grounding
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock bg providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
The improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if gou are in doubt that the appliance is properlg grounded. Do not modifg the plug provided with the appliance, if it will not fit the outlet, have a proper outlet installed bg a qualified technician.
dishwasher.
The faucet adapter is designed to fit standard spouts having internal or external threads. You will find the adapter and two washers in the faucet adapter packet in your dishwasher.
To install faucet adapter, first remove the old aerator or trim ring on gour faucet spout.
External Threads
,If faucet has external threads: Insert the thinner of the two washers into the faucet adapter and attach it to the faucet spout. Tighten with pliers.
Internal Threads
,If faucet has internal threads: Insert both of the washers into the faucet adapter and attach it to the faucet spout.
Tighten with pliers.
o If the faucet adapter threads do not match gour faucet spout, gour local hardware or plumbing supplg store normallg has additional fittings to adapt gour faucet spout to the special faucet adapter.
CAUTION: A sink sprag attachment hose can burst if it is installed on the same faucet as gour dishwasher. We suggest that gou disconnect the sink sprag attachment, if gour sink has one, and place a cap over the opening.