Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

About the dishwasher control panel. (For models without a sensor: EDW4000 Series,

EDW5000 Series, GHDA400 Series, GLD4000 Series, GLD5000 Series, HLD4000 Series and GLDL500 Series)

You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.

1

 

 

2

4

3

Control Settings

1Status Indicator Lights

The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a malfunction (see page 8). The lights will come ON indicating the sequence

of operation the dishwasher is in.

SANITIZED

Displayed when cycle has met sanitization conditions. Light remains ON until

(on some

door is opened.

models)

 

 

 

CLEAN

Displayed when a wash cycle is complete. The light stays ON as a reminder that

(on some

the dishes are clean until the door is opened or until another cycle is selected.

models)

 

2Cycles

The light above the selected pad will be ON to indicate which cycle has been selected.

SANI WASH

7.3 gal., 97 min.

(on some

This cycle raises the water temperature in the final rinse to sanitize your dishware.

models)

The cycle length will vary depending on the temperature of your inlet water.

 

NOTE: The SANI-WASHcycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

 

 

NOTE: NSF certified residential dishwashers are not intended for licensed food

 

 

establishments.

 

 

 

 

POTS & PANS

8.5 gal., 89 min.

 

or HEAVY

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-

 

WASH

on soils. Everyday dishes are safe to be used in this cycle.

 

 

 

 

NORMAL WASH

5.9 gal., 56 min.

 

 

This cycle is for medium/heavily soiled dishes and glassware.

 

 

 

 

LIGHT WASH

6.1 gal., 36 min.

 

(on some

This cycle is for everyday dishes and glassware.

 

models)

 

 

 

 

CHINA CRYSTAL 6.1 gal., 39 min.

 

(on some

This cycle is for lightly soiled china and crystal.

 

models)

 

 

 

 

 

RINSE ONLY

1.2 gal., 6 min.

 

 

For rinsing partial loads that will be washed later. Do not use detergent with

 

 

this cycle.

6

NOTE: Only the SANI-WASHcycle has been designed to meet the requirements of Section 6,

 

NSF 184 for soil removal and sanitization efficacy.

Page 5 Page 7
Page 6
Image 6
GE GLDL500 owner manual Sanitized
Page 5 Page 7

GLDL500 specifications

The GE GLDL500 is an innovative and advanced gas turbine engine designed for various applications, including power generation and industrial processes. Known for its efficiency, reliability, and advanced technology, the GLDL500 is a prime example of General Electric's commitment to producing cutting-edge energy solutions.

One of the main features of the GE GLDL500 is its high efficiency. The engine is designed to operate at an impressive thermal efficiency, allowing for lower fuel consumption and reduced emissions. This efficiency not only contributes to cost savings but also supports environmental sustainability efforts by minimizing the carbon footprint of operations.

The GLDL500 incorporates advanced materials and manufacturing techniques that enhance its performance and durability. It utilizes heat-resistant superalloys in its turbine section, which allow the engine to withstand the extreme temperatures and stresses experienced during operation. This not only prolongs the lifespan of the turbine but also improves the overall reliability of the system.

Another key characteristic of the GE GLDL500 is its modular design. This design enables easy maintenance and upgrades, making it a flexible choice for operators looking to adapt to changing energy demands or to incorporate new technologies. The modularity also simplifies logistics and reduces downtime, leading to increased operational efficiency.

The GLDL500 features advanced digital controls and monitoring systems. These systems provide real-time data on engine performance, allowing operators to make informed decisions and optimize the turbine's operation. The incorporation of digital technologies fosters predictive maintenance, helping to identify potential issues before they become significant problems.

In terms of environmental performance, the GE GLDL500 is compliant with stringent emission regulations. The engine is engineered to minimize NOx and CO2 emissions, ensuring that it meets or exceeds industry standards. This focus on clean energy solutions aligns with global efforts to transition towards more sustainable energy sources.

Overall, the GE GLDL500 stands out as a powerful, efficient, and environmentally friendly gas turbine engine. Its combination of advanced features, innovative technologies, and robust characteristics makes it an ideal choice for a variety of applications in the modern energy landscape, demonstrating GE's leadership in the gas turbine market. Operators investing in the GLDL500 can expect enhanced performance, reduced operational costs, and a commitment to sustainability.
Top Page Image Contents