GE GSD1920, GSD3130, GSD2130 Troubleshooting Tips Customer Service, Cycles, Energy Options, Start

Models GSD3130, GSD3210, GSD3220 and GSD3230
						OFF
						START
CYCLES			ENERGY OPTIONS				SHORT WASH
POT-	NORMAL	HI TEMP WASH		HEATED DRY
SCRUBBER	WASH	ON	OFF	ON	OFF
					PLATE WARMER
					(HEATED DRY ON)
1				2	RINSE & HOLD	1	3
					(HEATED DRY OFF)

Control Settings–Make sure the Dial is at the OFF position

1 Cycles

POTSCRUBBER/ For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday HEAVY WASH dishes may be included.This cycle will not remove burned-on foods.

NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.

SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads consisting mostly of glasses.

RINSE & HOLD For rinsing partial loads that will be washed later. Do not use detergent.

PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 31 minutes.

2 Energy Options

HI TEMP Provides extra heat for the best performance. It is used best with

WASH heavily-soiled dishes.

HEATED DRY Turns the drying heater on for fast drying. This cycle will extend the time ON to your wash cycle.

HEATED DRY Shuts off the drying heat options. Dishes air dry naturally and energy is saved.

OFF

3 Start

On some models—Latch the door and slowly turn the Dial to the START position. Don’t turn it past the START position, or you could accidentally miss a rinse.

On some models—Slowly turn Dial to the desired cycle and latch door to start. Don’t turn it past the desired wash cycle, or you could accidentally miss a rinse.

There is a time delay between start-up and water fill so you will not hear	9
any wash action right away.

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service