GE GSD500 manual ~~~, Questions? ====Use This Problem Solver

Models: GSD500

1 16
Download 16 pages 46.64 Kb
Page 11
Image 11

~~~, Questions?

——====Use This Problem Solver * i “———-

-~$’‘--—===

PROBLEM

DISHWASHER

WON’T RUN

UNUSUAL NOISE

POSSIBLE CAUSE AND REMEDY

A fuse in your home may be blown, or the circuit breaker tripped. Replace fuse or reset circuit breaker. Remove any other appliances from the circuit.

Utensils may not be secure on rack pins, or something small may have dropped from the rack. Water is causing utensils to rattle. Make sure everything is securely placed in dishwasher.

DISHES DON’T DRY

UNCLEAN DISHES

AND FLATWARE

-; BLACK OR GRAY MARKS ON DISHES

DETERGENT LEFT IN DISPENSER CUPS

DETERGENT CUP

LID WON”T LATCH

AFTER ADDING

DETERGENT

YELLOW OR

BROWN FILIM

.,

Make sure inlet water temperature is correct. (See Page 6.)

Unload the bottom rack first. Water from dishes in the top rack may be spilling into the bottom rack.

Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.

Check the rinse agent dispenser to see that it’s not empty.

Check inlet water temperature. It should be at least 120°F. (To test, see page 6.)

Water pressure may be temporarily 10W. Turn on a faucet. IS water coming out slower than usual? If so, wait until pressure is normal before using your dishwasher.

Plugged air gap. (See page 14.)

Improper rack loading. (See pages 8 and 9.)

Aluminum utensils often leave marks when they rub against dishes. Remove marks with a mild abrasive cleanser.

Water may not be reaching the detergent cups. Move dishes that may be blocking detergent cup.

The dispenser cover may not be opening or may be blocked by improperly loaded items. If you used a powder detergent, open the cup and remove any caked-on detergent. If the cup still doesn’t open automatically, call for service.

Detergent may be old. If the powder detergent is hard or caked in the box, throw it away. The detergent may not be working well. Try another brand.

Cycle Indicator Dial must be in OFF position for cup lid to close and latch properly. If you unlatch the door and open it to dry your dishes, the Cycle Indicator Dial does not advance to OFF by itself.

Tea or coffee can stain cups. Remove the stains by hand, using a solution of 1/2 cup bleach and 3 cups warm water.

An overall yellow or brown film on dishes or glassware can be caused by iron deposits in water. A special filter in the water supply line is the only way to correct this problem. Your water softener company can tell you about the filter.

Yellow film on sterling silver results when you wash copper utensils in the same load. Silver polish will usually remove this stain.

11

Page 11
Image 11
GE GSD500 manual ~~~, Questions? ====Use This Problem Solver