MORTANT SAFETY ~STRUCTIONS !

Read dl instmctions before using ttis appliance.

L

WARNING—When using this A appliance, always exercise basic

safety precautions, including the following:

. Use this appliance only for its intended purpose, as you will find described in this Use and Care Guide.

o

This dishwasher must be properly

‘Q “; ~

installed and located in accordance

+ + . . .

with the Installation Instructions

*.

before it is used. If you did not

 

receive an Installation Instructions sheet with your dishwasher, you can obtain one by calling, toll free, the GE Answer Center? 800.626.2000.

—This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead of the appliance.

—Connect to a properly rated, protected and sized power-supply circuit to avoid electrical overload.

Do not store or use combustible materials, gasoline or other

*1...- flammable vapors and liquids in the vicinity of this or any other appliance.

Use only powder or liquid detergents or wetting agents recommended for use in a dishwasher.

Do not wash plastic items unless marked “dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.

Load light plastic items so they will not become dislodged and drop to the bottom of the dishwasher—they might come into contact with the heating element and be damaged.

To minimize the possibility of injury.

When loading items to be washed:

A.Locate sharp items so that they are not likely to damage the door seal, and

B.Load sharp knives with the handles up to reduce the risk of cut-type injuries.

Do not tamper with controls.

Do not touch the heating element during or immediately after use.

Do not operate your dishwasher unless all enclosure panels are properly in place,

Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

Close supervision is necessary if this appliance

is used by or near children, Do not allow children to play inside, on or with this appliance or any discarded appliance. Dispose of discarded appliances and shipping or packing material properly. Before discarding a dishwasher, remove the door of the washing compartment.

Keep all washing detergents and wetting agents out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid personal injury.

To minimize the possibility of 0“$3 electric shock, disconnect this

appliance from the power supply b~fore attempting any maintenance. NOTE: Turning the control dial to the OFF position does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

WARNING—HYDROGEN GAS A is produced by the chemical action

within your water heater. It can accumulate in the water heater andor

water pipes if hot water has not been used for a period of two weeks or longer. HYDROGEN GAS IS EXPLOSIVE. To prevent the possibility of damage or injury, if you have not used hot water for two weeks or more, or moved into a residence in which the hot water system may not have been used for some time, turn on all hot water faucets and allow them to run for several minutes before using any electrical appliance which is connected to the hot water system. This will allow any hydrogen gas to escape. Also, since the gas is flammable, do not smoke or use an open flame

or appliance during this process.

SAVE THESE

INSTRUCTIONS

3

Page 3
Image 3
GE GSD980, GSD950 warranty Mortant Safety ~STRUCTIONS, Save These Instructions, To minimize the possibility of injury

GSD980, GSD950 specifications

General Electric (GE) has consistently led the way in the innovation of gas turbine technology, and among its notable offerings are the GSD900, GSD950, GSD800, GSD980, and GSD880 models. These turbines are engineered to meet a range of energy production needs and are characterized by their high efficiency, reliability, and adaptability in various operating environments.

The GSD900 model is designed for high-performance applications, featuring advanced aerodynamics and combustion systems that optimize fuel efficiency while minimizing emissions. This model leverages GE's latest developments in material science, allowing for improved thermal performance and durability. With a focus on modular design, the GSD900 offers simplicity in maintenance and enhanced uptime.

The GSD950 takes efficiency further with an enhanced turbine architecture that supports combined cycle applications. This model is renowned for its capacity to operate effectively with both natural gas and alternative fuels. Utilizing advanced digitally controlled combustion technology, it delivers exceptional operational flexibility. This translates into reduced operational costs for users, making it an attractive option for modern power generation facilities.

The GSD800 is built with versatility in mind, suitable for both distributed and centralized power generation systems. Its robust design ensures reliability even under challenging environmental conditions. The GSD800 integrates GE's proprietary digital solutions, which optimize performance and provide real-time monitoring capabilities. This feature allows operators to make data-driven decisions, enhancing operational efficiency.

GE's GSD980 is at the forefront of turbine innovation, incorporating cutting-edge technologies such as additive manufacturing. This allows for lighter components and reduced material waste while achieving higher performance levels. The GSD980 is engineered for maximum efficiency, notably within renewable and hybrid energy systems, greatly supporting the transition to cleaner power generation.

Finally, the GSD880 model merges the benefits of both the GSD800 and GSD950, focusing on high availability and low total lifecycle costs. It incorporates advanced control systems that optimize the balance between performance and emissions, appealing to both utility and industrial operators. Its compatibility with digital monitoring and predictive maintenance tools ensures that it remains a reliable choice for longstanding power generation needs.

In conclusion, the GE GSD900, GSD950, GSD800, GSD980, and GSD880 gas turbines reflect the company's commitment to advancing energy technology. Each model is built with specific applications in mind, providing users with options tailored to their unique operational requirements. With their innovative features and technologies, these turbines signify the future of efficient and sustainable energy production.