GE GSD950, GSD980 How To Operate Your Dishwasher, Step, Load your dishwasher. See Loading section

HOW TO OPERATE YOUR DISHWASHER

Your dishwasher is designed to give maximum performance on loads with normal and heavy soils. You may find that many of your dishes have lighter soils than normal, if this is the case you can save water and energy by selecting a cycle other than NORMAL WASH.

NOTE: The lights over the Cycle and Energy Option pads come ON to indicate the cycle/option that has been selected. These Cycle and Option Indicator lights remain on while the door is latched.

If dishwasher drains into a food waste disposal, operate the disposal until it is empty before starting dishwasher.

POT- NORMAL LIGHT WATER W\;~:fAT H:;\EO O;~~~~S

SCRUBBER WASH

6666660

Cycles L Energy Options J

Step 1.

Load your dishwasher. (See Loading section.)

Step 2.

Make sure the Cycle Indicator Dial is at the OFF position. Add detergent to the detergent dispenser. (See Detergent Guide.) Use a rinse aid agent to help prevent spotting. (See How to Use a Rinse Agent section.)

Step 5.

Select the desired Energy Options.

●WASH HEAT BOOST—Usethis option for best performance with heavily-soiled dishes. When selected, the wash cycle may be extended while the dishwasher heats the water for the best washing and drying. (See Cycle Selection Chart).

●HEATED DRY—Turns the drying heater on for fast drying. When selected, the cycle time will be extended for 35 minutes.

Step 3.

Latch the door.

Step 4.

Select desired wash cycle.

●POTSCRUBBER—Foritems such as pots, pans and casseroles with dried-on or baked-on soils. Everyday dishes may be included. This cycle will get heavily soiled dishes cleaner than the normal cycle. It will not remove burned-on foods.

●NORMAL WASH—For most loads of everyday dishes, glasses and cookware with medium soils. Designed to yield high performance on normal soils.

●LIGHT WASH—For loads that have dishes with light soils.

●WATER SAVER—For dishes with light soils. This cycle saves water by using 30~0 less water than the NORMAL WASH cycle.

4

●HEATED DRY off—Shutsoff the heating unit, thus saving energy. Dishes air-dry naturally. [t takes longer but saves energy. You can open the door after the motor stops to speed drying. Excellent for overnight drying.

●OPTIONS RESET—Turnsall Energy Options off.

Step 6.

Turn the Cycle Indicator Dial to START.

●Turning the dial to START will begin the cycle immediately. To obtain the benefits of a complete cycle, be careful that you do not turn the dial any farther than is necessary to start the dishwasher. There is a time delay between start-up and water fill so you will not hear any wash action right away.

— .——