Philips PV-GS55 operating instructions Initializing the Modes, To Change the Counter Display Mode

R:0h00m:

:

:

¥ (White):

Others

0:Remaining Number of Photoshot pictures

Remaining time of MPEG4

RapidFire Consecutive

Photoshot Recording -27-

Lock Setting -43-

DPOF Setting completed (set to

1or more picture) -43-

640 :[640k480] Image size

≥For images not recorded with this Palmcorder, the size display is determined as follows according to the number of horizontal pixels.

640	:					640 or more, less than 800 (The
						size is not displayed at under
						640 pixels.)
			:			800 or more, less than 1024
SVGA
		:				1024 or more, less than 1280
XGA
				:		1280 or more, less than 1600
SXGA
				:		1600 or more, less than 2048
UXGA
				:		2048 or more
QXGA
					(Cyan):	Photoshot Mode
PICTURE
					(Red):	While Photoshot recording is
PICTURE
						activated
					(Green): While the card is being read
PICTURE
PICTURE					(Red):	No Card (Still Picture Mode)
					(Cyan):	Moving Picture (MPEG4)
MPEG4
						Recording Mode
					(Red):	While Moving Picture (MPEG4)
MPEG4
						recording is activated

ªTo Change the Counter Display Mode

By changing [C.DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00.00), Memory Counter Indication [MEMORY] (M0:00.00), and Time Code Indication [TIMECODE] (0h00m00s00f). (-21-) By repeatedly pressing the [DISPLAY] Button on the Remote Controller, you can change the Counter Display Mode.

ªTo Display Date/Time Indication

To display Date/Time Indication, set the appropriate Date/Time in [DATE/TIME] on the [DISPLAY] Sub-Menu. (-21-)

You can also press the [DATE/TIME] Button of the Remote Controller repeatedly to display or change the Date/Time Indication.

ªTo Change the Display Mode

By changing [DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Display Mode to All Function Display [ALL] and Minimum Display [OFF]. (-21-)

ªProgressive Photoshot

You cannot use the Progressive Photoshot Function in the following cases.

When using Tape Recording Mode

≥Digital Effect Modes in [EFFECT1]

≥Digital Zoom [D.ZOOM]

≥1/750 s or faster shutter speed ≥When brightness is insufficient ≥When the MagicPix Function is ON ≥When the Portrait Mode is used

When using Card Recording Mode

≥When brightness is insufficient

≥When the MagicPix Function is ON

Initializing the Modes

You can change the Menu settings back to the shipping condition.

1Set [INITIAL] >> [INITIAL SET] >> [YES].

≥The initializing takes for a little while. ≥After the initializing is completed, the

[COMPLETED] Indication appears with beeps.

≥Initializing will not erase the clock setting (-24-) that has been adjusted.

Warning/Alarm Indications

If any one of the following indications lights up or flashes, please check the condition of the Palmcorder.

3DEW (DEW DETECT/EJECT TAPE): Condensation has occurred. -70-

Y(CHECK REC TAB):

The accidental erasure prevention switch on the inserted Cassette is open (that is, set to [SAVE]).

You are attempting Audio dubbing or Digital dubbing on a Tape while setting the accidental erasure prevention switch to [SAVE].

Y(TAPE NOT INSERTED):

No Cassette in inserted. -18-

6(LOW BATTERY):

The Battery is low. Recharge it. -16-

0: The built-in battery is low. -24-

:(NEED HEAD CLEANING):

The video heads are dirty. -71-

2END (TAPE END):

The tape came to end during recording.

REMOTE (CHECK REMOTE MODE):

Wrong Remote Controller Mode has been selected. -15-

UNPLAYABLE TAPE

(OTHER FORMAT):

You are attempting to play back a tape section that has been recorded with a different TV system.

UNABLE TO A.DUB

(LP RECORDED):

Because the original recording was done in LP Mode, audio dubbing cannot be performed.

-62-