Before Use
Quick Guide
1Attach the Battery to the AC Adaptor and charge it.
≥Before use, fully charge the Battery.
≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor.
≥The [CHARGE] Lamp lights up, and charging starts.
≥When the [CHARGE] Lamp goes off, charging is completed.
2Attach the charged Battery to the Palmcorder.
ªInserting a Cassette
1Slide the [OPEN/EJECT] Lever 1 toward the front and pull down to open the Cassette Compartment Cover.
2Insert a Cassette.
1
OPEN /
EJECT
3Close the Cassette Holder by pressing the [PUSH] mark 2.
4Close the Cassette Compartment Cover.
2
PUSH
ªInserting a Card
1Slide the [OPEN] Lever 1 to open the Card Slot Cover 2.
2While holding the Memory Card with its cut corner facing right 4, insert itinto the Card Slot 3.
3Close the Card Slot Cover 2 securely.
OPEN
1 
3
4 2
ªRecording on a Tape
1Set the [OFF/ON] Switch 1 to [ON].
≥The [POWER] Lamp 2 lights up.
ON
OFF
1
2POWER
2Set the Mode Dial to Tape Recording Mode.
S
D
PC
3Press the Recording Start/Stop Button.
≥Recording starts.
4Press the Recording Start/Stop Button again to pause the recording.
ªRecording a Still Picture on a Card
(Photoshot)
1Set the Mode Dial to Card Recording Mode.
D | PC |
| |
S |
|
2Press the [PHOTOSHOT] Button.
PHOTO SHOT
