GEAppliances.com

Safety

Screw

Hole

Bulb

Replacing the Light Bulb

Moving the control to COLD does not remove power to the light circuit.

The bulb is located behind the shield in the back wall.

Unplug the refrigerator.

Remove the shelves (if necessary).

Remove the screw.

Gently remove the light shield by inserting a flat head screwdriver into the slot at the top of the shield and pop it off.

Replace the bulb with a 25W appliance bulb with an E12 candelabra base.

NOTE: If the bulb is not available at your local hardware store, contact GE customer service.

Insert the tab at the bottom of the light shield into the light bulb housing and snap into place.

Replace the screw.

Replace the shelves if removed. Plug in the refrigerator.

Instructions Operating Instructions

Cover

Preparing for Vacation

For long vacations or absences, remove food and unplug the refrigerator. Clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open.

Preparing to Move

Secure all loose items such as shelves and

Be sure the refrigerator stays in an upright

drawers by taping them securely in place

position during moving.

to prevent damage.

 

7

Instructions

Installation

Support Consumer Tips Troubleshooting