Installation Refrigerator

Instructions Models GTL12HBX, GTR10HAX, GTR12HBX

If you have questions, call 1.800.GE.CARES or visit our Website at: GEAppliances.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT –Save these instructions for local inspector’s use.

•IMPORTANT –Observe all governing codes and ordinances.

•Note to Installer –Be sure to leave these instructions with the Consumer.

•Note to Consumer –Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Refrigerator Installation

15 minutes

Reversing the Door Swing

1hour

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

REFRIGERATOR LOCATION

•Do not install the refrigerator where the temperature will go below 55°F (13°C) because it will not run often enough to maintain proper temperatures.

•Install it on a floor strong enough to support it fully loaded.

•Do not install it closer than 5″ (13 cm) next to a range.

CLEARANCES

Free-standing installation only.

Minimum Clearances:

Back – 3″ from the condenser coils

LEVELING LEGS

Adjustable legs at the front corners of the refrigerator should be set so the refrigerator is firmly positioned on the floor, and the front is raised just enough that the door closes easily when opened about halfway.

To adjust the leveling legs, turn the legs clockwise to raise the refrigerator, counterclockwise to lower it.

To raise the refrigerator

8