Installation Instructions
11REHANG THE FRESH FOOD DOOR
If washers were used with hinges, make sure they are in place on the bottom hinge. Place the fresh food door on the bottom hinge, close the door and tape it in place with masking tape.
12INSTALL CENTER HINGE ON THE LEFT
Remove the three plug buttons on the left side and install them on the right.
Install the center hinge designed for the left side that came with the refrigerator, with the screws, spacer and washer(s) (on some models) that you removed in Step 2.
Remove the tape holding the door shut.
CAUTION: When assembled correctly, the hinge is tight against the cabinet.
ATTENTION: The screws must be properly tightened. Turn the screws until snug. Then tighten the screws a minimum of 1/2 turn using both hands.
13REHANG THE FREEZER DOOR
Place the freezer door on the center hinge over the pin.
Raise the top hinge by hand and insert the top hinge pin into the hole in the door. Then swing the door shut.
14ALIGN THE DOORS
Align the freezer door with the fresh food door so that the gap between the doors is even.
Tighten the top hinge screws by turning them until snug. Then turn the screws a minimum of 1/2 turn using both hands.
Install the hinge cover over the top hinge.
13