GE GXSM01HWW installation instructions GE Shower Filter, Use And Care/Installation Instructions

GE Shower Filter

USE AND CARE/INSTALLATION INSTRUCTIONS

Shower Filter—GXSM01HWW

Your new GE shower filter comes complete with all the necessary hardware for most installations. Each filter gives you up to 6 months of filtered water. The filter should be changed after 6 months of use or 10,000 gallons, whichever comes first.

SAFETY PRECAUTIONS

■Check with your local public works department for plumbing codes. You must follow these guidelines as you install the Water Filtration System. The Commonwealth of Massachusetts plumbing code 248 shall be adhered to. Consult with your licensed plumber for installation of system.

■Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather. Water freezing in the system will damage it.

■Your Water Filtration System will withstand up to 125 pounds per square inch (psi) water pressure. If your house water supply pressure is higher than 125 psi, install a pressure reducing valve before installing the Water Filtration System.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Discard all unused and packaging material after installation. Small parts remaining after installation could be a choke hazard.

This system is Tested and Certified by NSF International against NSF/ANSI Standard 177 for the reduction of the claims specified on the Performance Data Sheet.

SPECIFICATION GUIDELINES

	Service	Service		Temperature
Model	Flow Rate	Life	Pressure	Range
GXSM01HWW	2.5 gpm	10,000 gallons	20–125 psi	40°–160°F
	(9.5 lpm)	(37,900 liters)	(1.4–8.6 bar)	(4.4°–71.1°C)
		or 6 months*

*Filter life varies with local water conditions.

INSTALLATION INSTRUCTIONS

	Remove shower filter from shrink wrap packaging.
1
	Remove label off the bottom of the filter base.
2
	Remove the existing shower head from the shower pipe.
3
	Hold the unit in the final mounting position and connect the
4
	shower filtration system to the shower pipe by turning the swivel
	collar to tighten onto the threads of the shower pipe.
	Connect the shower head (removed in step 3) on the shower
5
	filtration system.
	Slowly turn on the cold water and check for leaks. Tighten
6
	if necessary.

INCLUDED COMPONENTS	TOOLS NEEDED
■ Shower Unit	■ None

■Filter

■Use and Care/Installation Instructions

PARTS LIST

Ref. No.	Part No.	Part Description
001	GXSM01HWW	Shower Filter System (includes filter)
002	FXSCH	Replacement Filter
0999	49-50164	Use and Care/Installation Instructions

For replacement parts and pricing in the U.S.: 800.626.2002.

In Canada: 866.777.7627.

Shower pipe

Swivel collar

Remove the label

Shower head*

*Shower head not included.

215C1180P001 49-50164-1 (06--06 JR) 147095 Rev. A

GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225

For service in the U.S., contact us at: ge.com or call 800.GE.CARES.

In Canada, call toll free, 866.777.7627.

1