Safety Instructions

Caring for the dishwasher

To clean the control panel, use a lightly dampened cloth, then dry thoroughly. To clean the exterior, use a good appliance polish. Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Protect Against Freezing

 

If your dishwasher is left in an unheated place

3 Drain water from the inlet line and water

 

during the winter, ask a service technician to:

valve. (Use a pan to catch the water.)

 

1 Cut off electrical power to the dishwasher.

4 Reconnect the water inlet line to the

 

Remove fuses or trip circuit breaker.

water valve.

 

2 Turn off the water supply and disconnect the

5 Remove the plastic sump cover in the tub

Sump cover screws

water inlet line from the water valve.

bottom and use a sponge to soak up water

in the rubber boot.

Instructions

Air gap

Does Your Dishwasher Have an Air Gap?

An air gap protects your dishwasher against water backing up into it if a drain clogs.

The air gap is not a part of the dishwasher. It is not covered by your warranty. Not all plumbing codes require air gaps, so you may not have one.

The air gap is easy to clean.

1Turn off the dishwasher and lift off the chrome cover.

2Unscrew the plastic cap and clean with a toothpick.

Operating

Tips

Check the air gap any time your dishwasher isn’t draining well.

Stainless Steel Panels

The stainless steel panels can be cleaned

You can order Stainless Steel Magic

with Stainless Steel Magic or a similar

#WX10X15 through GE Parts by calling

product using a clean, soft cloth.

800.626.2002.

Optional accessories

Troubleshooting

Consumer Support

You can change the appearance of your dishwasher by adding a custom panel trim kit.

1/4″ Wood panel trim kit—This accessory contains trim and instructions for you to supply and install a 1⁄ 4″ thick decorative wood door:

■GPF25B (Black) GPF325B/GPF425B

■GPF25W (White) GPF325W/GPF425W

■GPF25C (Bisque) GPF325C/GPF425C

3/4″ Trimless wood panel kit—This accessory contains parts and instructions for you to supply and install a 3 ⁄ 4″ thick decorative wood door:

■GPF375/GPF475

NOTE: The GPF100 dishwasher door spring kit must also be ordered and installed when the door panel weighs four lbs. or more. This kit is included with the 3/4” trim kits.

Non-wood countertop bracket kit—This is for installations which have non-wood countertops and includes side-mounting brackets and instructions for securing the dishawasher:

■GPF65

Consult your GE Appliance dealer to get the correct kit for your model.

These accessories are available at extra cost from GE. Call 800.626.2002 to order, or see your authorized GE Appliance dealer. Visa, MasterCard or Discover cards are accepted. Specify accessory number when ordering.

12

Page 11 Page 13
Page 12
Image 12
GE HDA3000, GHDA300 SERIES, GSD2000 Caring for the dishwasher, Optional accessories, Does Your Dishwasher Have an Air Gap?
Page 11 Page 13

GSD1000, GSD2000, GHDA300 SERIES, HDA3000 specifications

General Electric (GE) has long been a leader in the production of advanced gas detection systems. Among its notable models are the GSD2001, GSD1900, GSD1200, GSD1000, and GSD1100. Each model encompasses a range of features and technologies tailored to provide effective detection and management of gas leaks in various environments.

Starting with the GSD2001, this cutting-edge system is designed for the highest level of safety in industrial applications. It boasts a multi-gas detection capability, allowing it to monitor various gases simultaneously. This model uses advanced sensors that are highly sensitive, ensuring rapid response times to potential gas leaks. The GSD2001 also integrates with centralized monitoring systems, enabling real-time data analysis and automated alerts.

The GSD1900 is another robust model favored for its versatility and user-friendly interface. It is equipped with a high-resolution display that provides clear readings of gas concentrations. The system supports both wired and wireless connectivity options, allowing for flexible installation in diverse settings. Its modular design allows for easy upgrades and maintenance, making it a cost-effective solution for businesses.

Moving to the GSD1200, this model is renowned for its portability and ease of use. Designed for both indoor and outdoor applications, the GSD1200 offers battery-powered operation, enabling it to be deployed in remote areas without access to power sources. Its intuitive interface allows users to quickly calibrate and deploy the unit, providing essential gas safety measures in emergency situations.

The GSD1000 is a reliable choice for commercial environments, featuring a rugged design that withstands harsh conditions. It utilizes advanced detection technologies such as infrared sensors, enhancing accuracy and reducing false positives. Additionally, the GSD1000 integrates seamlessly with existing safety systems, enhancing overall operational safety.

Lastly, the GSD1100 stands out with its advanced analytics capabilities. It offers predictive maintenance features that use historical data to anticipate potential gas leak occurrences. This proactive approach not only enhances safety but also helps in efficient resource management. The GSD1100’s open architecture facilitates integration with other GE products, providing a comprehensive safety solution.

In summary, GE's range of gas detection systems, including the GSD2001, GSD1900, GSD1200, GSD1000, and GSD1100, showcases a commitment to advancing safety in various industrial applications through innovative technologies and user-friendly designs. These models cater to a wide array of operational needs, ensuring effective monitoring and management of gas hazards.
Top Page Image Contents