ge.com

WARNING! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE DISHWASHER

Junked or abandoned dishwashers are dangerous…even if they will sit for “just a few days.” If you are getting rid of your old dishwasher, please follow the instructions below to help prevent accidents.

Before You Throw Away Your Old

Dishwasher:

■ Take off the door of the washing compartment or remove the door latch keeper (as shown).

Door latch keeper

WARNING! When using your dishwasher, follow basic precautions, including the following:

Safety Instructions

Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner's Manual.

■Use only powder, tabs, liquid detergents or rinse agents recommended for use in a dishwasher and keep them out of the reach of children. Cascade®, Cascade® Complete and Electrasol® Automatic Dishwashing Detergents, and Jet-Dry®and Cascade Crystal Clear® rinse agents have been approved for use in all GE dishwashers.

■Locate sharp items so that they are not likely to damage the door seal.

■Load sharp knives with the handles up to reduce the risk of cut-type injuries.

■Do not wash plastic items unless marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

■Do not touch the heating element during or immediately after use.

■Do not operate your dishwasher unless all enclosure panels are properly in place.

■Do not tamper with controls.

■Do not abuse, sit on or stand on the door or dish rack of the dishwasher.

■Do not allow children to play around the dishwasher when opening or closing the door due to the possibility of small fingers being pinched in the door.

■Do not discard a dishwasher without first removing the door of the washing compartment or the latch keeper.

■Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Do not allow children to play with, on or inside this or any discarded appliance.

Troubleshooting Tips

Consumer

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY.

SAVE THESE INSTRUCTIONS

3

Support

Page 2 Page 4
Page 3
Image 3
GE GSD1000, HDA3000, GHDA300 SERIES, GSD2000 manual Before You Throw Away Your Old Dishwasher, Ge.com
Page 2 Page 4

GSD1000, GSD2000, GHDA300 SERIES, HDA3000 specifications

General Electric (GE) has long been a leader in the production of advanced gas detection systems. Among its notable models are the GSD2001, GSD1900, GSD1200, GSD1000, and GSD1100. Each model encompasses a range of features and technologies tailored to provide effective detection and management of gas leaks in various environments.

Starting with the GSD2001, this cutting-edge system is designed for the highest level of safety in industrial applications. It boasts a multi-gas detection capability, allowing it to monitor various gases simultaneously. This model uses advanced sensors that are highly sensitive, ensuring rapid response times to potential gas leaks. The GSD2001 also integrates with centralized monitoring systems, enabling real-time data analysis and automated alerts.

The GSD1900 is another robust model favored for its versatility and user-friendly interface. It is equipped with a high-resolution display that provides clear readings of gas concentrations. The system supports both wired and wireless connectivity options, allowing for flexible installation in diverse settings. Its modular design allows for easy upgrades and maintenance, making it a cost-effective solution for businesses.

Moving to the GSD1200, this model is renowned for its portability and ease of use. Designed for both indoor and outdoor applications, the GSD1200 offers battery-powered operation, enabling it to be deployed in remote areas without access to power sources. Its intuitive interface allows users to quickly calibrate and deploy the unit, providing essential gas safety measures in emergency situations.

The GSD1000 is a reliable choice for commercial environments, featuring a rugged design that withstands harsh conditions. It utilizes advanced detection technologies such as infrared sensors, enhancing accuracy and reducing false positives. Additionally, the GSD1000 integrates seamlessly with existing safety systems, enhancing overall operational safety.

Lastly, the GSD1100 stands out with its advanced analytics capabilities. It offers predictive maintenance features that use historical data to anticipate potential gas leak occurrences. This proactive approach not only enhances safety but also helps in efficient resource management. The GSD1100’s open architecture facilitates integration with other GE products, providing a comprehensive safety solution.

In summary, GE's range of gas detection systems, including the GSD2001, GSD1900, GSD1200, GSD1000, and GSD1100, showcases a commitment to advancing safety in various industrial applications through innovative technologies and user-friendly designs. These models cater to a wide array of operational needs, ensuring effective monitoring and management of gas hazards.
Top Page Image Contents