97859 Instructions.quark 2/26/02 1:28 PM Page 3
CONNECTING YOUR MOUSE
CAUTION: Always turn off your computer before connecting or disconnecting your mouse. To connect your mouse, plug the PS/2 connector
into your computer’s PS/2 port.
INSTALLING YOUR iWHEELWORKS SOFTWARE | PS/2 |
| Mouse Port: |
In order to take full advantage of your mouse, you must install the enclosed software. While your input device will work as a basic mouse once it is plugged in, the software must be loaded to use the programmable features.
To install from Windows® 95/98/Me/NT/2000:
1.Insert the Mouse SETUP DISK into your floppy disk drive.
2.Click the Start button and then click Run.
3.Now type <drive>:\ setup. For example, if the Mouse SETUP DISK is in drive A, type: a:\ setup
4. Now click OK . (Follow the
NOTE: If you do not restart your computer, the software will not operate.
5.Once restarted, the mouse icon 8 should appear in the Windows® system tray. Double click the icon to bring up your mouse control panel.
CUSTOMIZING YOURMOUSE
From the mouse control panel, you can customize your mouse to meet your indi- vidual needs! Just click on the appropriate tab to adjust settings:
1
