GE JBP48 Oven Control, Clock and Timer Features and Settings, Using the oven controls.

8
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsConsumer Support
BAKE Pad
Touch to select the bake function.
BROIL HI/LO Pad
Touch to select the broil function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function
error code. Touch the CLEAR/OFFpad. Allow the oven to
cool for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to the
oven and call for service.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage.
START Pad
Must be touched to start any cooking or
cleaning function.
COOKING TIME Pad
Touch and then touch the number pads to
set the amount of time you want your food
to cook. The oven will shut off when the
cooking time has run out.
DELAYSTART Pad
Use along with COOKING TIME or
SELF CLEAN STD/LO pads to set the oven
to start and stop automatically at a time
you set.
OVEN LIGHT ON/OFF Pad
Touch to turn the oven light on or off.
SELF CLEAN STD/LO Pad
Touch to select self-cleaning function. See
the Using the self-cleaning oven section.
CLEAR/OFF Pad
Touch to cancel ALL oven operations
except the clock and timer.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
KITCHEN TIMER ON/OFF Pad
Touch to select the timer feature.
CLOCK Pad
Touch before setting the clock.
Oven Control, Clock and Timer Features and Settings
Using the oven controls.
Features and appearance
may vary.