www.GEAppliances.com

Problem

 

Possible Causes

What To Do

 

 

 

 

 

Control signals after

 

You forgot to enter

Touch the BAKE pad and desired temperature or the

entering cooking time

 

a bake temperature

SELF CLEAN STD/LO pad and desired clean time.

 

or delay start

 

or cleaning time.

 

 

 

 

 

 

 

Clock and timer

 

A fuse in your home may

Replace the fuse or reset the circuit breaker.

 

do not work

 

be blown or the circuit

 

 

 

 

breaker tripped.

 

 

 

 

 

 

 

 

 

Oven controls

See the Using the clock and timer section.

 

 

 

improperly set.

 

 

 

 

 

 

 

Oven light does

 

Light bulb is loose

Tighten or replace the bulb.

 

not work

 

or defective.

 

 

 

 

 

 

 

 

 

Switch operating light

Call for service.

 

 

 

is broken.

 

 

 

 

 

 

 

Oven temperature

 

Oven thermostat

See the Adjust the oven thermostat—Do it yourself!

 

too hot or too cold

 

needs adjustment.

section.

 

 

 

 

 

 

Oven will not work

 

A fuse in your home may

Replace the fuse or reset the circuit breaker.

 

 

 

be blown or the circuit

 

 

 

 

breaker tripped.

 

 

 

 

 

 

 

 

 

Oven controls

See the Using the oven section.

 

 

 

improperly set.

 

 

 

 

 

 

 

 

 

Plug on range is not

Make sure electrical plug is plugged into a live,

 

 

 

completely inserted in the

properly grounded outlet.

 

 

 

electrical outlet.

 

 

 

 

 

 

 

 

 

Oven too hot.

Allow the oven to cool to below locking temperature.

 

 

 

 

 

 

Oven will not

 

Oven controls

See the Using the self-cleaning oven section.

 

self-clean

 

improperly set.

 

 

 

 

 

 

 

“Crackling” or

 

This is the sound of the

This is normal.

 

“popping” sound

 

metal heating and cooling

 

 

 

 

during both the cooking and

 

 

 

 

cleaning functions.

 

 

 

 

 

 

 

Excessive smoking

 

Excessive soil.

Touch the CLEAR/OFF pad. Open the windows to

 

 

 

 

rid the room of smoke. Wait until the LOCKED DOOR

 

 

 

light goes off. Wipe up the excess soil and reset the

 

 

 

clean cycle.

 

 

 

 

 

 

Oven door will

 

Oven too hot.

Allow the oven to cool below locking temperature.

 

not open after a

 

 

 

 

clean cycle

 

 

 

 

 

 

 

 

 

Oven not clean

 

The oven temperature is too

All the range to cool to room temperature and

 

after a clean cycle

 

high to set a self-clean operation.

reset the controls.

 

 

 

 

 

 

 

 

Oven controls not properly set.

See the Using the self-cleaning oven section.

 

 

 

 

 

 

 

 

Oven was heavily soiled.

Clean up heavy spillovers before starting the clean

 

 

 

 

cycle. Heavily soiled ovens may need to self-clean

25

 

 

 

again or for a longer period of time.

 

 

 

 

 

 

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Page 25
Image 25
GE JBP48 Control signals after, Or delay start, Clock and timer, Do not work, See the Using the clock and timer section