www.axxessid.com
Installation & User Guide
Fire alarm
This section gives you the ability to unlock all the doors in your building simultaneously by using only one controller. The way it works is that, if the fire alarm is triggered on the current controller all the access points listed in the doors selected list will be opened at once. To enable the settings tick the Enable Fire Alarm box.
Doors available list contains all the access point configured on your PC. By default the Doors selected list contains only the reader(s) that are connected to the current controller and you cannot remove them. You can add more doors to your list by double clicking on them or using the buttons bellow the list. Press the download button once you’re finished.
Test Connection
Test communication checks the communication between the PC and the device through transmitting messages from one to the other. The number of these messages is given in the Packets field.
When you press the Test Connection button the PC will start sending 500 (default) packets to the device and the device responds by sending 500 packets back to the PC.
You can control the speed of the process by specifying the delay between 2 packets. The number in the delay field is in milliseconds.
The connection is considered to be in a good condition, provided that no more than 15% of the sent packets are lost.
AX200 Installation & User Guide – July 2007 | 6 8 |
