www.axxessid.com
Installation & User Guide
9.Click on the ? at the end of the Server IP address. The Server IP address will fill in.
On local area networks (LAN) the Device IP address and the Server IP address will match for the first 3 numbers (Segment address) and the last number will be unique to the AX200.
10.Enter a name for the AX200 and an IP address for the device. To ensure that this IP address is not already assigned click on the ? next to the device IP address. Do not use an IP address that is already assigned as this will cause the system not to operate correctly. Enter the subnet mask and if advised by the network administration manager, enter the gateway IP address for this device.
11.Click on the download button and confirm by clicking yes. After approximately 5 seconds the AX100 add wizard will appear.
AX200 Installation & User Guide – July 2007 | 9 |
