GEAppliances.com

Safety

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

To replace the cover:

Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.

Connect electrical power to the range.

Instructions Operating Instructions

Do not store a soiled broiler pan and grid anywhere in the range.

Broiler Pan & Grid

Do not clean the broiler pan or grid in a self- cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Care and Cleaning

Oven Heating Elements

Do not clean the broil element. Any soil

On some models, the bake element is not

will burn off when the element is heated.

exposed and is under the oven floor. If spillovers,

To clean the oven floor, gently lift the bake

residue or ash accumulate on the oven floor,

element. Clean with warm, soapy water.

wipe up before self-cleaning.

 

31

Troubleshooting Tips Consumer Support

Page 31
Image 31
GE JBP84 Instructions Operating Instructions, Oven Light Replacement, Broiler Pan & Grid, Oven Heating Elements