GE JBP15, JBP22, JBS03, JBS15, JBS27, JBP60, JBS0 Oven Heating Elements, Oven Shelves, Oven Light Replacement

CAUTION: Before replacing your oven light

bulb, turn the oven light off and disconnect the

electrical power to the range at the main fuse

or circuit breaker panel.

Be sure to let the light cover and bulb cool

completely.

To remove the cover:

Hold a hand under the cover so it

doesn’t fall when released. With fingers

of the same hand, firmly push back the

wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt household

appliance bulb.

To replace the cover:

Place it into groove of the light

receptacle. Pull wire forward to the

center of the cover until it snaps

into place.

Connect electrical power to the range.

ge.com

27

Do not clean the bake element or the broil element.

Any soil will burn off when the elements are heated.

To clean the oven floor, gently lift the bake

element. Clean with warm soapy water.

Clean the oven shelves with an abrasive

cleanser or scouring pad. After cleaning,

rinse the shelves with clean water and dry

with a clean cloth.

NOTE: Take the shelves out of the oven

before you begin the self-clean cycle or

they may discolor.

To make the shelves slide more easily, apply

a small amount of vegetable oil or cooking

oil to a paper towel and wipe the edges of

the oven shelves with the paper towel.

Wire cover holder

Oven Heating ElementsOven Shelves

Oven Light Replacement (on some models)

Operating

Instructions Care and Cleaning Installation

Instructions Troubleshooting Tips

Safety Instructions Consumer Support

Contents

Main Safety Information Operating Instructions Ranges Care and Cleaning Electric Coil & Radiant Installation Instructions Troubleshooting Tips Accessories Consumer Support ge.com Owners Manual and Installation Instructions WARNING IMPORTANT SAFETY NOTICE SAFETY PRECAUTIONS COOK MEAT AND POULTRY THOROUGHLY SAFETY PRECAUTIONS SELF-CLEANING OVEN OVEN SURFACE UNITSALL MODELS WARMING DRAWER RADIANT SURFACE UNITS COIL SURFACE UNITS READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY. SAVE THESE INSTRUCTIONS Using the surface units. Throughout this manual, features and appearance may vary from your model. How to Set Indicator Lights (on radiant glass models only) About the radiant surface units Temperature Limiter Using the radiant surface units. Selecting types of cookware. Surface Cookware Tips Stainless Steel: Aluminum: Copper Bottom: Oven Control, Clock and Timer Features and Settings BAKE/TEMP RECALL Pad BAKE Light START/ON Pad Display Oven Control, Clock and Timer Features and Settings Before you begin Using the oven. KITCHEN TIMER ON/OFF Pad CLOCK Pad Display SET +/- Pads Page Using the oven. Broiling Guide Not all features are on all models. To Set the Timer Using the clock and timer. To Set the Clock To Turn Off the Clock Display Not all features are on all models. Using the clock and timer. To Reset the Timer To Cancel the Timer End of Cycle Tones Power Outage Using the timed baking and roasting features. How to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic Stop Special features of your oven control. How to Set for Timed Baking/RoastingImmediate Start and Automatic Stop Using the Sabbath Feature. (Designed for use on the Jewish Sabbath and Holidays) How to Set for Regular Baking/Roasting Using the Sabbath Feature. Adjust the oven thermostatEasy to do yourself! To Adjust the Thermostat with this Type of Knob To Adjust the Thermostat on Other Models To Adjust the Thermostat with this Type of Knob Using the warming drawer. When Using the Warming Drawer CAUTION: Control Knob ON Signal Light CAUTION: To Crisp Stale Items To Warm Serving Bowls and Plates CAUTION: Food Type Control Setting Rack CAUTION: Using the self-cleaning oven. Before a Clean Cycle How to Set the Oven for Cleaning The oven door must be closed and all controls set correctly for the cycle to work properly. After a Clean Cycle How to Delay the Start of Cleaning Lift-Off Oven Door Be sure electrical power is off and all surfaces are cool before cleaning any part of the range. Oven Interior Oven Heating Elements Oven Shelves Oven Light Replacement CAUTION: Broiler Pan & Grid Control Panel and Knobs Storage Drawer Removal Warming Drawer Rack Removable Warming Drawer Porcelain Enamel Cooktop Lift-Up Cooktop Surface Units Drip Pans Painted Surfaces Oven Vent Glass Window Stainless Steel Surfaces Cleaning the glass cooktop. Burned-On Residue Damage from Sugary Spills and Melted Plastic Metal Marks and Scratches Cooktop Seal Glass surfacepotential for permanent damage. To Order Parts Installation Free-Standing Instructions BEFORE YOU BEGIN WARNING PREPARE TO INSTALL THE RANGE TOOLS YOU WILL NEED 1 MATERIALS YOU MAY NEED PARTS INCLUDED ELECTRICAL CONNECTIONS ELECTRICAL REQUIREMENTS CAUTION: POWER CORD AND STRAIN RELIEF INSTALLATION 3 ELECTRICAL CONNECTIONS 4-WIRE POWER CORD INSTALLATION 4 5 WARNING: 3-WIRE CONDUIT INSTALLATION 6 INSTALL THE RANGE ANTI-TIP DEVICE INSTALLATION WARNING: 9 REPLACE THE WIRE COVER LEVEL THE RANGE (CONT.) 10 11 FINAL INSTALLATION CHECKLIST OPERATION CHECKLIST Page Page Page Page Page Accessories. Page General Electric Company Warranty Registration Department P.O. Box 32150 Louisville, KY 40232-2150 GE Service Protection Plus Please place in envelope and mail to: Well Cover Any Appliance. Anywhere. Anytime.* Consumer Product Ownership Registration GE Consumer & Industrial Appliances General Electric Company Louisville, KY 40225 ge.com Consumer Product Ownership Registration Model Number Serial Number Follow these three steps to protect your new appliance investment: Model Number Serial Number For The Period Of: GE Will Provide: Electric Range Warranty. What GE Will Not Cover: