32
Cleaning the glass cooktop. (on some models)
Operating
Instructions Safety InstructionsCare and Cleaning
Installation
Instructions
Troubleshooting Tips
Consumer Support
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45° angle
against the glass surface and scrape
the soil. It will be necessary to apply
pressure to the razor scraper in
order to remove the residue.
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE®Ceramic Cooktop
Cleaner on the entire burned residue
area. Use the CERAMA BRYTE®
Cleaning Pad to remove any
remaining residue.
For additional protection,
after all residue has been removed,
polish the entire surface with
CERAMA BRYTE®Ceramic Cooktop
Cleaner and a paper towel.

Burned-On Residue

WARNING: DAMAGE to your glass surface may
occur if you use scrub pads other than those
recommended.
Allow the cooktop to cool.
Spread a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner
on the entire burned residue area.
Using the included CERAMA
BRYTE®Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after
all residue has been removed, polish
the entire surface with CERAMA
BRYTE®Ceramic Cooktop Cleaner
and a paper towel.