GE JDP39DNCC dimensions GE 30 Drop-In Electric Range with Self-Cleaning Oven, KW Rating 240V

JDP39DN

GE® 30" Drop-In Electric Range with Self-Cleaning Oven

Dimensions and Installation Information

KW Rating

240V	10.8
208V	8.1

6" Min. from walls

	Shave Raised Edge To	Clear
30" Min.	31-1/8" Wide Control	Panel
	Excluding Models JDS28 and
	9/16

Note: Cabinets installed adjacent to drop-in ranges must have an adhesion spec of at least 194°.

Important

30” Drop-In Ranges are designed to hang from the countertop. It does not rest on the floor. For installation alternatives, refer to installation instructions packed with product.

Note: 30” Drop-In Electric Ranges conform to U.L. requirements for 3” minimum spacing between range and side walls above countertop.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service,

2-7/8" To Front Surface of Countertop

2431-1/4

20-5/8" Door

Clearance

From Front

Surface of

Countertop

26-1/2**

(excluding handle)

	23-3/16
If necessary,
build upsides
to 1-1/4" thick	27-1/2
to provide
countertop	36
support
Accessory
Backguard
A/B*	30

27

*JXS37 is 5-1/4" and JXS32 is 4"

**Total depth from wall to front of closed oven door including handle is 29-1/2.

30" Min.

Acceptable Electrical Outlet

Area Also In Adjacent 18" Min.

Cabinet Or Under Floor

Conduit is 40" long

25

7-1/2

800.626.2000.

Dimension and installation information are shown in inches.

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

Listed by Underwriters Laboratories

Specification Revised 10/08

320827