GE JDS28CKCC Special features of your oven control, Using the Sabbath Feature. On some models

Models: JDS28CKCC

1 24
Download 24 pages 61.52 Kb
Page 11
Image 11

Special features of your oven control.

ge.com

Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.

When the display shows your choice, touch the START/ON pad. The special features will remain in memory after a power failure.

NOTE: The Sabbath feature and the Thermostat Adjustment feature are also Special Features, but they are addressed separately in the following sections.

Safety Instructions

12 Hour Shut-Off

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.

If you wish to turn OFF this feature, follow the steps below.

Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Touch the CLOCK pad. The display will show ON (12 hour shut-off). Touch the CLOCK pad repeatedly until the display shows OFF (no shut-off).

Touch the START/ON pad to activate the no shut-off and leave the control set in this special features mode.

Operating Instructions Care

Using the Sabbath Feature. (On some models)

(Designed for use on the Jewish Sabbath and Holidays)

The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling.

NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.

and Cleaning

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

How to Set for Baking/Roasting

NOTE: To understand how the oven control works, practice using regular baking (non- Sabbath) before entering Sabbath mode.

Make sure the clock shows the correct time of day and the oven is off.

Touch and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

Tap the CLOCK pad until SAb appears in the display.

Touch the START/ON pad and ⊃ will appear in the display.

Touch the BAKE pad. No signal will be given.

The preset starting temperature will automatically be set to 350.° Tap the

+or pads to increase or decrease the temperature in 25° increments. The temperature can be set between 170° and 550.° No signal or temperature will be given.

Touch the START/ON pad.

After a random delay period of approximately 30 seconds to 1 minute, ⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ doesn’t appear in the display, start again at Step 4.

To adjust the oven temperature, touch the BAKE pad and tap the + or pads to increase or decrease the temperature in 25° increments. Touch the START/ON pad.

NOTE: The CLEAR/OFF and COOKING TIME pads are active during the Sabbath feature.

To exit Sabbath feature, see next page.

11

Troubleshooting Tips Consumer Support

Page 11
Image 11
GE JDS28CKCC Special features of your oven control, Using the Sabbath Feature. On some models, Safety Instructions