Care and cleaning of the range. | ge.com |
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the
How to Remove Protective Shipping Film and Packaging Tape
Safety Instructions
Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time.
To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Operating Instructions
Groove Stem
Molded rib
Spring clip
Clear groove in stem
Control Knobs
The control knobs may be removed for easier cleaning.
Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning.
The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the inside of the knobs are dry before replacing.
Replace the knobs in the OFF position to ensure proper placement.
Care and Cleaning
Control Panel
It’s a good idea to wipe the control panel | Do not use abrasive cleansers, strong |
after each use of the oven. Use a damp | liquid cleaners, plastic scouring pads or |
cloth to clean or rinse. For cleaning, use | oven cleaners on the control panel— |
mild soap and water or a 50/50 solution | they will damage the finish. |
of vinegar and water. For rinsing, use |
|
clean water. Polish dry with a soft cloth. |
|
Oven Heating Elements
Do not clean the bake element or the broil | To clean the oven floor, gently lift |
element. Any soil will burn off when the | the bake element. Clean with warm |
elements are heated. | soapy water. |
13
