GE JDS28DNWW dimensions GE 30 Drop-In Electric Range with Standard Clean Oven, KW Rating, 240V

JDS28DN

GE® 30" Drop-In Electric Range with Standard Clean Oven

Dimensions and Installation Information

KW Rating

240V	11.6
208V	8.7

6" Min. from walls

	Shave Raised Edge To	Clear
30" Min.	31-1/8" Wide Control	Panel
	Excluding Models JDS28 an
	9/16

Note: Cabinets installed adjacent to drop-in ranges must have an adhesion spec of at least 194°.

Important

30” Drop-In Ranges are designed to hang from the countertop. It does not rest on the floor. For installation alternatives, refer to installation instructions packed with product.

Note: 30” Drop-In Electric Ranges conform to U.L. requirements for 3” minimum spacing between range and side walls above countertop.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

2-7/8" To Front Surface of Countertop

2431-1/4

27

20-5/8" Door

Clearance

From Front

Surface of

Countertop

	23-3/16
If necessary,
build upsides
to 1-1/4" thick	27-1/2
to provide
countertop	36
support
Accessory
Backguard
A/B*
	30

30" Min.

Acceptable Electrical Outlet

Area Also In Adjacent 18" Min.

Cabinet Or Under Floor

Conduit is 40" long

25

7-1/2

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

26-1/2**	*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)	**Total depth from wall to
	front of closed oven door
	including handle is 29-1/2.
	Dimension and installation information are shown in inches.

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

Listed by Underwriters Laboratories

Specification Created 7/08

320829