Before You Start
Removing the front panel | Use and care of the remote |
1 Press DETACH to release the front | control |
panel. | Installing the battery |
|
Section
01
English
2Grab the front panel and remove.
3Put the front panel into the provided protective case for safe keeping.
Attaching the front panel
1Slide the front panel to the left until it clicks.
Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit.
2Press the right side of the front panel
until it is firmly seated.
# If you can’t attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly.
Slide the tray on the back of the remote con- trol out and insert the battery with the plus (+) and minus
!When using for the first time, pull out the film protruding from the tray.
WARNING
Keep the battery out of the reach of children. Should the battery be swallowed, consult a doc- tor immediately.
CAUTION
!Use one CR2025 (3 V) lithium battery.
!Remove the battery if the remote control is not used for a month or longer.
!There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic objects.
!If the battery leaks, wipe the remote control completely clean and install a new battery.
!When disposing of used batteries, comply with governmental regulations or environmen- tal public institutions’ rules that apply in your country/area.
En | 5 |
