Other Functions
Using the AUX source
You can connect an auxiliary equipment to this unit using a stereo mini plug cable.
%Insert the stereo mini plug into the input jack on this unit.
For more details, refer to the installation man- ual.
Selecting AUX as the source
%Press SRC to select AUX as the source.
# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 23.
Setting the AUX title
The title displayed for the AUX source can be changed.
1After you have selected AUX as the source, use
2Enter a title in the same way as the
For details concerning operation, refer to En- tering disc titles on page 15.
Turning the clock display on or off
You can turn the clock display on or off.
!Even when the sources are off, the clock display appears on the display.
%Press CLOCK to turn the clock display on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock display appears again after 25 seconds.
Section
05
English
En 25