GEAppliances.com
Burner Head and Cap Replacement
Safety
Burner cap properly seated
Burner cap not properly seated
Replace the burner head onto the burner base, making sure that the head is properly oriented over the burner base and the electrode. Make sure to place the correct burner head on the correct burner base and that the burner head sits level on the burner base. The burner heads are not interchangeable.
Replace the burner cap onto the burner head, making sure to place the correct burner cap on the correct burner head. The burner caps are not interchangeable. Also, make sure that the burner caps are properly seated on the burner heads.
Operating Instructions
JGP940 and JGP970 (all burners) |
| JGP328, JGP330, JGP628, JGP630, | ||
| JGP933 and JGP963 |
| JGP933, JGP945, JGP963, JGP975 | |
|
|
| ||
| (right front burner only) |
|
| |
|
| Burner cap |
|
|
|
|
|
| Burner cap |
|
| Burner head | Stability | Burner head |
|
|
| chamber |
|
Locator |
| Electrode |
| Electrode |
pins |
|
|
| |
Pin |
| Burner |
| Burner base |
| base |
| ||
indentations |
| |||
|
|
| ||
JGP945 and JGP975
(right front burner only)
Burner cap
Burner head
assembly
Orifice
| Burner |
Electrode | base |
Cleaning and Care Instructions
Make sure the pins in the burner heads match | Make sure the slot in the burner head is positioned | Make sure the hole in the burner head assembly |
the burner base indentations and that they are | over the electrode. The burner cap has three | is positioned over the electrode and that the burner |
properly seated in them by rotating the heads | to four pins. When replacing the cap, make sure | head is fully inserted inside the burner base. A |
until they are level. | none of the pins sits in the stability chamber. | small gap between the base and head is normal. |
Burner Grates
(On some models)
“OUTSIDE” “INSIDE” “OUTSIDE”
edge edges edge
(On some models)
“INSIDE”
edges
“OUTSIDE”
edge
Tabs
Your cooktop has professional style grates. These grates are designed for specific positions. These grates should only be used in their proper positions; they should not be interchanged. For your convenience, the undersides of the left and right grates are marked “OUTSIDE” and “INSIDE”. Make sure that the sides marked “OUTSIDE” are facing the outer edge of the cooktop and
the sides marked “INSIDE” are facing each other. All grates
should touch once they are
fully assembled on the cooktop surface.
For cooktops with three grates, make sure that the tabs on
“OUTSIDE” either side of the center grate edge
fit into the slots located on the “INSIDE” edge of the side grates.
Lift the burner grates out only when cool. Grates should be washed regularly and, of course, after spillovers. Wash them in the dishwasher or in hot, soapy water and rinse with clean water. When replacing the grates, be sure they are positioned securely over the burners.
Although they are durable, the grates will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures. You will notice this sooner with lighter color grates.
Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.
NOTE: Do not clean the grates in a
11