Installation Instructions
A2
Cutouts for Double Built-In-Oven
Junction Box
Location
Cabinet 
10" 
Width
27"
Allow 7/8"
Cutout
Width
25" MIN.
25 1/4" MAX.
Cabinet Width | 27” |
Recommended |
|
for overlap of oven over side edges of cutout 
44"
above base
Cutout Location | 13 1/4” |
from Floor |
Alternate
junction
Cutout Height
rail
Cutout Depth | 23 5/8” Min. |
box
2" x 4" or location equivalent
runners
20"
Allow a minimum of 20" for clearance to adjacent corners, drawers, walls, etc.
when door is open Allow 1" for overtlap of oven top and bottom
of cutout
49 11/16" MIN.
50 1/8" MAX.
5"
Recommended cutout location from floor
13 1/4"
Cutout Wdth | 25” Min. |
| 25 1/4” Max. |
Cutout Height | 49 11/16” Min. |
| 50 1/8” Max. |
SUITABLE
BRACING TO SUPPORT RUNNERS
C |
L |
18"
OVER CENTERLINE
OF CABINET
| NOTE: If the cabinet does not | |
| have a front frame and the sides | |
2" x 4" or | are less than 3/4” thick, shim | |
both sides equally to establish | ||
RUNNERS | ||
EQUIVALENT |
| |
| the cutout width. |
If the cabinet does not have a solid bottom, then two braces and runners must be installed to support the weight of the oven. For double ovens the runners and braces must support 275 pounds.
6
